Inverters #5797540

V/f inverter, from 0.4 up to 3.7kW
* Power supply: 115-230V 1ph and 460V 3ph (10%), 50/60Hz (5%)
* Motor ratings from 0.4kW (0.5Hp) to 3.7kW (5.0Hp)
* Certifications: CE, UL and cUL

Features:
Regulation control mode: SPWM (Sinusoidal Pulse Width Modulation) control (V/f control)

The Inverter SIEIDrive ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector

Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryers windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.

Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function

Options:
DeviceNet module
Profibus module
CANopen module
DIN-rail adapter for ADV20 size 1
Earthing plate
USB-RS485 RJ45 Converter
Braking Unit Module
Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy

Space-Vector Inverter
* Power supply: 3 x 400Vac480Vac, 50/60Hz
* Motor power ratings from 4kW (5Hp) to 7.5kW (10Hp)
* New installation and Retrofitting
* Speed range up to 1m/s with open loop
* Protection degree IP20
* Marks: CE

Features:
Output frequency 500Hz
Integrated braking module (optional external resistor)

AGL50 is a set of drives dedicated to controlling 4 to 7.5 kW asynchronous motors for lifts.
In view of its specific software, this series is particularly suitable for system modernisation and, generally, for all up to 1m/s open-loop applications.
Simple, flexible programming, which can be managed using an alphanumeric keypad or PC configurator, permits fast start-up of the drive.
Functions:
16 multispeeds
4 multiramps (linear, S-shaped with independent jerk settings)
Self-tuning of motor parameters
Integrated lift sequences
Speed expressed in m/s
Management of space calculated by the drive, even offline
Short floor Control
Motor contactor control
Integrated brake control
Speed regulator adaptive gain technology

Options:
Dedicated EMC filters (in compliance with EN12015)
Input and Output chokes
Braking resistors

3-phase power supply: 400 V 15%500 V +5% 50/60 Hz 5%
Motor ratings from 1.5 kW (2 Hp) to 1.2 MW (1600 Hp)

* 3-phase power supply: 690 V 10% 50/60 Hz 5%
Motor ratings from 75 kW to 1.2 MW

* Certification: CE UL and cUL

General characteristics:
Control modes: Open-loop FOC, V/F
Maximum output frequency 600 Hz
Integrated choke DC side
Integrated mains filter
Integrated dynamic braking module (up to 75 kW)
Light or heavy overload control
Integration of up to 3 options onboard the drive
Safety Stop card according to IEC 61508 SIL 3, EN 954-1 Cat. 3, EN 61508 and EN 61800-5-2
Multi-language programming SW (10 languages)
PLC with advanced IEC61131-3 programming environment
Integrated basic PLC
Alphanumerical programming keypad
2 bipolar analog inputs (Voltage/Current)
2 bipolar analog outputs (1: Voltage/Current, 1: Voltage)
6 digital inputs (PNP/NPN)
2 digital outputs (PNP/NPN)
2 relay outputs, single contact
RS485 serial line (Modbus RTU)
Interfacing with the most commonly-used fieldbus systems: ProfiBus, CANopen, DeviceNet, Ethernet/IP, Ethercat, BACnet, LonWorks
IP20-rated protection

Gefran has applied its application experience to the new series of ADV200 WA industrial drive inverters for the Water Treatment and HVAC sectors.
Specific power structures for variable or quadratic loads, combined with intelligent optimisation of energy consumption and specialised functions, offer important advantages in terms of plant design and ease of startup as well as economic benefits.
Specific configurations and application macros and parameters in engineering units cater to the wide-ranging technological requirements of the Water Treatment and HVAC sectors and guarantee easy, intuitive installation and setup for users at any level.

Functions:
Self-tuning of speed-current-flux regulators and identification of motor data with motor idle or rotating
Quick startup menu
Instant overload up to 180%
I2t thermal protection for motor, drive and braking resistor
Multispeed function (16 programmable speeds)
4 independent ramps with jerk settings
Potentiometer function
Motor auto-capture function
Dual PID control with self-tuning
Dedicated water treatment functions
Dedicated HVAC functions
Integrated timers with Real Time Clock
Macros for specific applications (application pre-loaded)
Mains loss detection with: controlled stop and/or power optimisation
Variable switching frequency
Variable Torque and Constant Torque modes
MDPLC advanced development environment (according to IEC 61131-3)
Programming keypad with 5 complete sets of drive parameters.

Options:
I/O expansion cards, which can be combined according to machine requirements
Temperature sensor acquisition cards
Integrated fieldbus interface: ProfiBus, CANopen, DeviceNet, Ethernet/IP, Ethercat, BACnet, LonWorks
Safety Stop card according to IEC 61508, SIL 3, EN 954-1 Cat. 3, EN 61508 and EN 61800-5-2
Braking resistors (standard for the entire range)
Output chokes (standard for the entire range)

OPT-485-ADV, RS485 optoisolator for multidrop connections
EXP-IO-D6A4R1-ADV, I/O expansion card
EXP-IO-D5R8-ADV, I/O expansion card
EXP-IO-SENS-1000-ADV, Temperature sensor control card
EXP-IO-SENS-100-ADV, Temperature sensor control card
EXP-CAN-DN-ADV, CANopen/DeviceNet fieldbus interface card
EXP-PDP-ADV, Profibus DP fieldbus interface card
BUy, Braking Unit
Modbus RTU
KB-ADV Programming keypad remote control kit