Post Buy Requirement
BI
dubai, United Arab Emirates
Add Review

Other Products / Services

GF VEDO Line Control Panel

10, 4 display

Resolution 800600 (SVGA)

Touch screen: resistive, analog

Field bus connectivity

(CANOpen, Modbus RTU, Modbus TCP)

Ethernet 10/100 BaseT

Fan less



The GF_VEDO line of operator terminals offers a compact and economic system for machine control.

Machine cycle control [IEC1131 based Soft PLC] and graphic page display [SCADA] are integrated in a single product.

This integration provides a variety of quick and economical automation solutions.

The GF_VEDO ML 104CT is offered with a 10.4 TFT active matrix display, with resolution of 800600 pixel (SVGA).

The processor belongs to the GEODE family (32 bit), with a minimum of 128 MB to a maximum of 512 MB of RAM, depending on the operating system installed.

A extremely important feature is the complete absence of moving parts: a Compact Flash mass memory of various capacity [1GB2GB] is used, offering maximum safety even in the presence of strong vibration.



A wide range of peripheral I/O is available:

- 1x RS485 optoisolated

- 2xEthernet 10/100 Base-T

- 4xUSB 2.0 (Host)

- Fieldbuses keyboard

- Auto-ON

- 1xRS232

- PS/2 Mouse and Keyboard

- 1 x Fieldbus [optional] (CAN Layer 2)



The product can be ordered with different operating systems already installed, such as:

- VxWorks

- Windows XP Embedded



This solution allows the creation of various automation architectures (including real time) and the use of software from other suppliers.

The GF_VEDO family includes products with display from 3.5 to 15, with or without integrated machine keyboards.



In addition ready-to-use application are available, such as:

- GF_PACK_EXTRUSION extrusion

- GF_PACK_INJECTION injection

View Complete Details

Thermoelements For Temperature Measure



    • Temperature limits:: 40 + 250 C






    • Tolerance: Norme UNI 7938 standards, IEC 584.2 :

      class 2: for types J, K: 2.5 C






    • Extension cable insulation: fibreglass, screened TEFLON






    • Eyelet thermocouple with low thermal profile and quick response time, suitable for measures on flat surfaces





  • Cable to DIN standard

View Complete Details

Modular Power Controllers

The GEFLEX family is an innovative solution for industrial temperature control, designed to install on DIN guide in electrical panels.
A single compact unit integrates PID temperature controllers, solid state relays with heat-sink, current and voltage transformers, auxiliary inputs and outputs, and serial communication

View Complete Details

TPSA Pressure Transmitter



    • Ranges from: 050 bar to 01000 bar (from 0750 to 015000 psi)






    • Accuracy: 0.1% FSO typical






    • Complete range of voltage/current outputs






    • Stainless steel construction






    • Protection rating: IP65 / IP67






    • Wetted parts: 17-4 PH





  • Operating temperature range: -40+105C


Series TPSA transmitters are based on bonded strain gauge on stainless steel technology.

An innovative mechanical structure makes the transducer completely insensitive to tightening.

This transducer is suitable for allapplications where along with robustness an elevated accuracy is required.

View Complete Details

Enhanced Power Controller

Universal control devices, ideal for all types of industrial electrical heating

View Complete Details

Brushless Servomotors

Brushless Motors for industrial applications

* AC Mains Supply: 400Vac (230Vac and 460Vac on request)

* Rated speed: 1500, 2000, 3000, 4500 and 6000 rpm

* Stall torque: from 0, 4 up to 115Nm

* Mounting: B5 (V1 and V3 available on request)

* Marks: CE and cUR



General Standard Features:

Motor insulation Class F; windings Class H

Keyed shaft

Flange B5

Swivelling 90 conncetors

Poles number: 4 6 8 10

Natural cooling

Feedback through: Resolver 2 poles Sincos 5 tracks Absolute Encoder Endat 2.2

Protection degree IP65



Options and configurations on request:

Holding brake

Reinforced Holding brake

Reinforced bearings

Forced ventilation

Smooth shaft

Custom connectors orientation

Terminal box

Custom feedback devices

Oil seals



The brushless motors series S65 have been developed to warrantee a full application flexibility and economic advantages, in all the industrial application where are mandatory features such as high efficiency, high motors performance and space optimization.

The S65 series provides high dynamics in accelerations and decelerations, achieving the highest level of performance for what is concerning duty cycles rapidity and accuracy and providing mechanical transmission really exceptional.

View Complete Details

CU Compact Load Cell



    • Range of measurement: from 50 to 1, 000 Kg






    • Accuracy class: 0.2%






    • All stainless steel construction






    • Corrosion resistant






    • Grade of protection: IP67 (DIN 40050)





  • Compact size


The CU range of load cells are designed for the measurement of static or dynamic loads in compression.

All the transducers are calibrated as load cells in units of mass (Kg).

The CU series is supplied for nominal loads from 50 Kg to 1 T.

This model has an IP67 protection degree so it can be used in aggressive atmospheres often found in the chemical industries.

The transducer body is machined from a single piece of stainless steel with no welding.

This means that it is highly resistant to mechanical shock and vibration.

The compact size means that these cells can be placed in positions that are difficult to acess and where little space is available

View Complete Details

Distributed Machine Control

A distributed solution that satisfies the demands of complex systems and machines.HIGH SCALABILITY AND CONFIGURABILITY
- Distributed solution, scalable and configurable in the field
- Powerful scalable processorsETHERNET REAL-TIME CAPABILITY
- A completelyEthernet real-time solution for perfect system integration
- Integrated Motion Control TechnologyEFFICIENT DIAGNOSTIC
- Advanced diagnostic in every module
- Error management

View Complete Details

Compact Machine Controller

n extremely compact and efficient solution covering a wide range of applications thanks to custom-designed solutions.CUSTOM SOLUTION
- Custom inputs/outputs, no wasted resources
- Open frame ideal for a perfect integration in machine design
- Customizable lexan and graphicsCONTROL, VISUALIZATION AND COMMUNICATION
- A 3-function product
- Easy and secure export/import
- IEC 1131-3 programmingPROCESS ORIENTED
- Dedicated PID, FB library
- Secure data recording
- Wide range of analog inputs/outputs
Brochure


GCubeFit flyer
User Manual


HW Installation and user manual

View Complete Details

Indicators Alarm

GEFRAN indicators are configurable, panel-mounted, microprocessor instruments that display variables such as temperature, pressure, position, flowrate, etc.

View Complete Details

Static Contactors

Static relay with integrated heatink, ready to use

View Complete Details

Low Profile Shear Load Cell



    • Range of measurement: from 500 to 5, 000 Kg






    • Accuracy class: D (OIML IR60)






    • All stainless steel construction






    • Corrosion resistant






    • Insensitive to lateral loads






    • Low profile





  • Class of protection: IP66 (DIN 40050)


The principle of measurement of the SB series of load cells is the deformation caused by the shear generated by the applied load. They are compact load cells with an all stainless steel construction that are extremely rigid towards the measured load and lateral or transverse loads.

The SB series load cells are the ideal solution for industrial weighing applications such as storage silos, weighing platforms and dosing systems

View Complete Details

Integrated Machine Control System

A secure and reliable solution for managing stand-alone machine processes.MODULAR IOS SYSTEM
- Wide range of input/output modules
- I/O modules with 8, 16 and 32 digital points, relay, analog, encoder, temperature, strain-gauge
- Expandable and scalableREAL-TIME SOLUTION
- For perfect precision and repeatabilityETHERNET
- Double Ethernet port
- Data always available (File Transfer Protocol)
- Remote access

View Complete Details

Melt Pressure Transmitters



    • Pressure ranges:

      0-100 to 0-1000 bar / 0-1500 to 0-15000 psi






    • Accuracy:

      < 0.25% FSO (H); < 0.5% FSO (M)






    • Standard threading 1/2-20UNF, M18x1.5; other versions on request






    • Other types of diaphragms are available on request






    • Autozero function on board / external option





  • 15-5 PH stainless steel diaphragm GTP coated


The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350C). Medium pressure is transferred directly to the sensitive silicon element via a thick diaphragm. Strain is transduced by a micro-worked silicon structure (MEMS). The operating principle is piezoresistive. IMPACT is Gefrans exclusive series of high-temperature pressure sensors that use the piezoresistive principle. The main characteristic of IMPACT sensors is that they do not contain any transmission fluid. The sensitive element, directly positioned behind the contact membrane, is realised in silicon through microprocessing techniques. The micro structure includes the measurement membrane and piezoresistors. The minimum deflection required by the sensitive element makes it possible to use very robust mechanics. The process contact membrane can be up to 15 times thicker than the membrane used in traditional Melt sensors

View Complete Details

Galvanically Isolated Strian Gauge Transducer Amplifier



    • Galvanic isolation between the Supply Voltage and the Amplifier > 500 Vdc






    • Linearity error > 0.02% full scale output






    • Current output 3-wires






    • Low thermal drift < 0.01% full scale/C





  • 10Vdc transducer supply


The CIR-D voltage or current amplifiers have been designed to enable the user to adapt non-amplified strain gauge transducers (load cells, pressure transducers) to acquisition systems, PLC, instrumentation with high level inputs.

These amplifiers have galvanic isolation between the supply voltage and the transducer to increase the rejection of noise generated by the power supply itself.

The availability of the output in current enables the signal to be carried over long distances or used in intelligent automation systems.

View Complete Details

Digital Timers And Counters

Digital Timers and Counters multirange and multifunctions, panel mounting, for industrial automation use, with single/double display and relay outputs

View Complete Details

GF-BOX Industrial PC

Main applications

Process supervisor

Gateway between field and control systems

Data centralization

Human-machine interface (HMI) (*)

Control of machines and systems

Data display (*)

Programmable Automation Control

Main features

Mounting on horizontal and vertical plates

High performance

Modularity

Easy maintenance and access

Reduced depth

Scalable functions

Connectivity

No internal wires

In Conformity with UL508

(*) with remote display



GF-BOX is a PC box with highly scalable control functions. This version combines the typical functions of PC architecture with a number of specific control application functions (such as use of the VxWorks operating system with GAB programming environment) in a compact case. The Intel processor power can be used for high performance control and automation. Because GF-BOX can be operated with Windows XP (both Professional and Embedded), it can be used for many industrial applications, such as machine control units, data centralization systems, and supervision.

GF-BOX is equipped with a VGA interface (resolution 1024768 at 16 million colors) for connection to external monitors and displays. This version uses Intel Mobile class processors; such as the Celeron 600 MHz, Celeron 1500 MHz, which efficiently manages heat dissipation in order to limit use of the PC cooling fan. GF-BOX can be fitted with a DOM-type solid state mass storage or a 2.5 HD for better configuration, depending on the application and operating system used. Thanks to the complete series of available ports (Ethernet, USB, serials, parallel, PS/2, etc.), GF-BOX can be connected to the various peripherals commonly used by industry. Optional custom interfaces and standard PCI and PC104 expansion slots provide maximum connectivity. Available interfaces include CAN bus, RS422/485 serial expansions and additional Ethernet channels. A number of functions, such as keyboard control, LEDs, and switch-on logic output with programmable timer, are useful for controlling machines and industrial lines. Careful construction and mechanical design make it easy to install and give correct access to expansions. Simple maintenance guarantees long life and reliability.

View Complete Details

Flush Diaphragm Pressure Transducer



    • Ranges: from: 010 to 01000 bar

      (0150 to 015000 psi)






    • Accuracy: 0.2% FSO typical






    • Protection rating: IP65/IP67






    • Wetted parts: 17-4PH






    • Temperature range: -40+120C






    • Flush fitting stainless steel measuring diaphragm





  • Internal calibration signal


TPF Series flush diaphragm pressure transducers are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH stainless steel, TPF is particularly suitable for pressure measurement where the media is with high viscosity (thick fluids, oils, rubber, pulps, chemical products, etc.) and the traditional transducers with internal measuring chamber cannot be used. The high thickness of the diapragm makes the product very reliable and suitable for heavy industrial application.

Internal state of the art electronics and very high precision mechanical machining make TPF product the ideal solution for above needs, where the non amplified mV/V sensor has to be used

View Complete Details

Plug-in Display For Transmitters



    • Universal mounting on Transducers with 4-20 mA Output;

      Plug DIN43650






    • No additional Power Supply required






    • Easy to programming using Push Buttons






    • Compact Sandwich construction






    • Good Readability through LED-Display





  • Alarm: Open-Collector-Output


The model TDP plug-in display is a universal local display suitable for use with various transmitters. The transmitter must be fitted with an analogue output and a connector in accordance with DIN43650. Type TDP2000 can be delivered for use in hazardous areas. The plug-in display is simply plugged in between connector and socket; it is then ready for operation. The plug-in display is user programmable

View Complete Details

Field Oriented Vector AC Drive

Field oriented vector AC Drive, from 4kW (5Hp) to 90kW (125Hp)


* Power supply: 3 x 230 Vca (-15%) 500 Vca (+5%), 50/60Hz;


* Motor power ratings from 4kW (5Hp) to 90kW (125Hp);


* Marks: CE. UL, cUL.



Features:


Control mode:


- Field-oriented vector control with feedback,


- Open-loop vector control,


- Open-loop V/f control;


Maximum output frequency: 500Hz (V/f),


300Hz (Field-oriented vector control with feedback), 150Hz




The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.


It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.


The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.



Functions:


Brake Control of electromechanical parking brake mounted on the motor;


16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);


Dedicated function for Energy Saving;


PID controller, with value settings in engineering units;


Two self-tuning Modes.



Options:


Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;


EMC filter;


Input choke (standard from size 4300);


Output chokes;


Braking resistors;


Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);


I/O expansion cards (EXP-IO--ADL).
View Complete Details

Active Front End Regenerative Power Supply

Active Front End Regenerative Power Supply Unit, from 22kW to 1.2MW

* Power supply: 380VAC -15% 500VAC +5%, 50/60Hz

* Power ratings: from 22kW to 1.2MW

* Cosphi 0, 99

* Overload 150% for 60 sec every 5 minutes (Heavy duty) or 110% for 60 sec every 5 minutes (Light duty)

* IP20-rated protection (IP00 size 7 and parallel)




The AFE200 offers a number of advantages:

Clean Power thanks to the unit power factor and reduced harmonic distortion (

View Complete Details

Armature DC Converters

Digital converters, from 20A to 3300A

* 3ph 230Vac500Vac, 50/60Hz; 3ph 690Vac, 50/60Hz

* Rated currents: from 20A to 3300A (biquadrant and tetraquadrant)

* IP20 (IP00 for currents over the 1050A)

* Marks: CE, UL, cUL

500Vac Line

. 3ph supply: 230Vac500Vac 50/60Hz

. biquadrant (.-2B): from 20A up to 3300A

. tetraquadrant (.-4B): from 20A up to 3300A



The SIEIDrive TPD32 series of digital converters is available in a wide range of motor power ratings and power supply types for solutions using both two quadrant and four quadrant operation.

Designed to minimise user system requirements, the TPD32 offers a range of functions and dedicated application packages to cover the most complex requirements of modern industrial automation systemsFunctions:

Quick start up

Autotuning of the speed and current regulators

5 Independent programmable Multi-ramps

Programmable Linear and Sshaped ramps

7 Programmable Multispeeds

Independent regulation of the Min/Max speed for each direction sense of rotation

Current limitation in accordance with the speed

Adaptive gains of the speed regulator

Independent management of the integral gain at zero speed

Programmable overload control

Jog function

Motorpotentiometer function

I2t motor protection

PID function block

Servodiameter control function

Speed Draw function

Autocapture function (Flying restart)

Droop function

Options:

Programming keypad KB

I/O expansion card TBO-32

Profibus interface SBI-PDP-32

DeviceNet interface SBI-DN

CANopen interface SBI-COP

View Complete Details

Vector Inverter For Lifts

Vector inverter for lifts with asynchronous motors

* Power supply 3ph: 230 400 460/480 Vac 10%, 50/60Hz 10%

* Motor ratings from 4kW (5Hp) to 45kW (60Hp)

* Designed for New installations and Retrofitting

* Speed range from 0, 5 to 1, 2 m/sec

* Marks: CE. UL and cUL



Features:

For Geared systems

Control modes: Field-oriented vector control Sensorless



Derived from the ADL200, the ADL100 series is the Entry level range for simple, low-speed systems:

For asynchronous motors only

control: Advanced V/f SSC (Sensorless Scalar Control) SLS FOC (*)

(*) digital encoder card in ADL120 versions only

Simplified I/O configuration

optional external EMC filter

SD card and fieldbus not available

terminal strips are not extractable.



Functions:

Speed control

EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.

Lift sequence

Typical sequence of input/output signals, I/O management, braking, output contactor and door control.

Easy to read parameters in customer units

Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s, m/s for cabin acceleration.

Lift mechanical parameters

Mechanical system parameters setting such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.

Ramp generation

Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.

Multiple speeds

8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure

smooth starting.

Pre-torque (load compensation)

Initialisation of the speed regulator by the load cell sensor for smooth starting.

Overload

Overload capacity optimised for typical lift application load cycles.

Automatic fan control

The cooling fan control logic activates the internal fans according to the temperature of the drive heat sink.

Emergency return to the floor power supply capability

In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)

Commissioning Wizard functionality

Wizard menu for immediate system start-up



Options:

KB_ADL multilingual programming keypad with memory

EMS (emergency supply module)

Dedicated external EMC filters (in compliance with CEE-EN 61800-3)

External braking resistors

AC and DC input chokes

View Complete Details

AC/DC Three Phase Half Controlled Converter

DC power supply, DC link current from 185 A up to 2000 A

* Power supply from a three-phase mains 400V AC +10% -15% or 480 V +10% -15%

* DC link current from 185 A up to 2000 A

* Protection degree: IP20 (IP00 for 2000A)

* The SM32 converter is suitable to supply power to both single and multiple inverter systems connected to a common DC link.

* Marks: CE



The SieiDrive SM32 devices are AC/DC three-phase half-controlled converters designed to supply constant voltage to the DC link of the AVy and AGy inverters.

SM32 is suitable to power supply both single and multiple inverter systems parallel connected to a common DC link.

The precharge of the leveling capacitors, which can be set via internal dip-switches, is performed by partializing the Mains voltage via an input thyristor bridge.

A diagnostic circuit allows to set the delay time for the switching off of the power thyristor during a power dip.

Inputs/Outputs

- Relay outputs: 1 drive OK contact (normally open, closed after the precharge)

- 2 digital outputs: MLP signal (sum of the precharge and of the set undervoltage threshold) and ML signal (Mains voltage monitoring).



Protection functions

Opening of the OK relay in case of:

- overtemperature

- power supply loss on the regulation card (15V)

- power supply loss

- completely discharged DC link.



Options:

Input chokes

- An input choke is compulsory for the functioning of the SM32 power supply

View Complete Details

PC Based Panel Mounted Control

TFT display

High performance

Modularity

Scalable functions

Connectivity

Easy access and maintenance

Reduced depth

Applications in harsh environments



GT-C is an extremely powerful, modular, PC based, panel mounted control.

The application programs for the user interface screens and machine operating cycle (soft-logic) run on the GT-C.

GT-C is based on an Intel Celeron 400 MHz processor, which may be substituted with either a PentiumIII-M 800 MHz or a PentiumM 1, 1 GHz new generation processor equipped with Intel Centrino technology.

This particular architecture, based on the ETX standard, allows for ongoing upgrading of the product to keep pace with changes in technology.

All the processors are of the low voltage, low consumption type that do not require individual cooling fans, thus the GT-C can even be placed in severe environments.

The GT-C can be equipped with a solid state, mass storage memory of the DOM type, or a 2.5 HD for improved configuration depending on the application utilised.

Thanks to the full range of available ports, namely Ethernet, USB, serial, parallel, PS/2 etc., GT-C can connect with the various peripherals that are currently in use in the industrial field.

If to this we add the optional customised interfaces, and the standard PCI, PC104 and PCMCIA expansion slots, a particularly broad spectrum of connectivity is achieved.

Amongst the available interfaces are those for CAN, CANOpen, DeviceNet and Profibus, as well as the RS422/485 serial line expansions for Modbus.

The GT-C supports LCD TFT 10, 4 and 12, 1 colour displays, both offering 800600 pixel resolution.

It is also possible to install an optional touch screen membrane.

The standard GT-C version is equipped with a keyboard panel with groups of programmable keys.

8 function keys under the display and 23 programmable keys for different screens; 20 keys are configured with customisable graphics on removable labels, 49 keys configured with status LEDs for management of machine commands, with customisable graphics on removable labels and 6 monitoring LEDs, as well as a customisable customer logo on removable labels.

For memorising machine data, the front panel is equipped with a USB connection for the Pen drive offered as one of the available accessories.

The GT-C can also be ordered with a customised synoptic of the customers own design.

The care taken during assembly and the careful mechanical study provide the user with ease of installation, proper access to the GTCs expansions and proper product maintenance, thus ensuring durability and reliability over time.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Bonita International General Trading. (Bonita International General Trading.)
  • 1201 Al Masraf Tower, Baniyas Road, Deira, P. O. Box 118852, Dubai – United Aarab Emirates, United Arab Emirates
  • Share us via