Transducer #5797540

• Range of measurement: from 100N to 2kN

• Accuracy class: 0.5%

• Corrosion resistant

• Internally generated calibration signal

• Orientation of the axis of maximum sensitivity for 35 independently from the position of the fixing holes

• Grade of protection: IP65 (DIN 40050)

• Integrated protection against overloads

TR series force transducers are used to measure the tension that plastic films or tapes exert on the guide rollers of the machinery used to coil them.
Mounted at the ends of a fixed or transmission shaft on the machine chassis, they perform the function of force sensors and bearing for the ends of the shaft.
They are used on both fixed and rotating shafts.
TR transducers are supplied with the adaptor flange for fixing, with 4 M6 screws or with one central M10 or M12 screw.

• The transducer has been improved in order to guarantee greater reliability under all conditions

• Mechanical linkage using joint with take up of play, M5 thread

• Installation is made simpler by the absence of electrical signal variation in output, outside the Theoretical Electrical Stroke

• The new grooves provide an excellent alternative to the usual system of fastening with

• Strokes from 50 to 1500mm

• Sliding or floating magnetic cursor

• Direct analog output for displacement

• Work temperature: -20+75C

• IP65 protection

• Power supply 24Vdc 20%

Contactless linear position transducer with innovative GEFRAN ONDA magnetostrictive technology for longer lifetime. The absence of electrical contact on the cursor eliminates all wearing and guarantees almost unlimited life. The new ONDA technology solution (patented by Gefran) allows to obtain an essential modular structure with compact size for simple installation

• Range of measurement: from 5 to 20 kN

• Accuracy class: 1%

• All stainless steel construction

• Corrosion resistant

• Grade of protection: IP65 (DIN 40050)

• Small size

The AM force transducers series have been designed to measure static and dynamic compression forces.
They are particularly suitable for monitoring pounding operations in compression which require a rugged transducer, insensitive to high resonance frequencies caused by non-homogeneous leads in dynamic sequences.
The accuracy and the stability are not affected by continuous cycling under harsh conditions even with dynamic loads.
The small size of the AM force transducers makes them ideal for retrofitting in existing equipment.

• The transducer has been improved in order to guarantee greater reliability under all conditions

• A sturdier structure makes the LT series even stronger for applications with heavy vibration

• Installation is made simpler by the absence of electrical signal variation in output, outside the Theoretical Electrical Stroke

• The new grooves provide an excellent alternative to the usual system of fastening with brackets

• Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines

Certifications:
Sensor CE Conformity Declaration,
Sensor ATEX and CE Conformity Declaration,
RoHS

50 to 750 mm stroke
- Mechanical fixing and selfaligning linkage using 2 ball-joints
- Maximum angular movement up to 30
- Independent linearity 0.05%
- Repetibility 0.01 mm
- Infinite resolution
- No variation of electrical signal outside theoretical electrical stroke
- Displacement speed up to 5 m/s
- Working temperature: -30+100C
- Elec

• Range of measurement: from 750 to 1, 500 kN

• Accuracy class: 1%

• Internally generated calibration signal

• All stainless steel construction

• Corrosion resistant

• Grade of protection: IP65 (DIN 40050)

The CC force transducers have been designed for use in the plastics industry where it is required to measure the reaction force to the extrusion pressure that is present on the casing of the gearbox along the axis of the extruder screw.
These models, fitted in contact with the thrust bearings, measure a force whose valve, after suitable correction, is equal to extrusion pressure multiplied by the screw area.
The CC cylindrical force transducers are all stainless steel construction and configured in such a way that the body, airtight welded, acts also as the case, making a unit that is smaller than the CT series.
The connector in the shank is on the same axis as the transducer, which in some cases alows easier installation.