Post Your Requirement Menu

Welcome User

Other Products / Services

We offer a complete product range of copper tube, Tube Cutter, Hydraulic Rubber Hose, Thermoplastic Hose and industrial air hose

copper tube

Copper Tube has a proven performance and provides a cost effective solution to many pipework requirements on the basis of its inherent properties. Copper pipework is highly durable, easy to work with and to install. Copper Tube sets the standard for quality, consistency and service in the plumbing, refrigeration and HVAC industries. Coppers rigidity allows for installation both in horizontal and vertical applications, utilising an excellent resistance to corrosion coupled with high temperature and pressure ratings can be offered for a large variety of installs. Its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Copper Tube the ideal products for most hot and cold water, central heating and gas services installations. Applications:   Air conditioner,  Water heater,  Oil cooler pipe,  Refrigerator Copper Tube Applications Copper tubing is rust proof, easy to bend, also forms good joints. It is used in many low pressure applications such as the cooling system, the heating system, and sanitary installation, but also in the air-conditioning system, which has a higher rated pressure.   Tube Sizes Tube sizes are metric or inch, ranging from 3 mm/0.118 inch O.D. to 70 mm/2 3/4 inch O.D. with a choice of wall thicknesses. Sizes may be noted as O.D. x wall thickness (in mm or inch) or as O.D x I.D. (in mm or inch). Tubes come as coils or in 5m/16 ft standard lengths. Copper is subject to work hardening (material becoming hard and brittle from bending). Therefore it should be protected from excessive vibra- tion. Never use copper tubing for brake or power steering work. If you are looking for other item, check our  hydraulic metal tube  selection!

View Complete Details

Tube Cutter

Description Tube Cutter is used for cutting tubes of nylon, soft nylon, polyurethane, and other soft plastic tubes of 12mm or less. It’s durable enough to cut hard plastic tubing yet lightweight and small enough for convenient storage. Also suitable for 1/8″ to 3/4″ O.D. tubing. Cuttings Rules A. When cutting tubing, it is important to produce a square-end, free of any burrs, either on the otuside or inside. B. Plastic tubing should be cut with purpose-made cutting pliers, never with ordinary cutting pliers or a hacksaw. The metal tube cutter may be used with any soft metal tubing, such as copper, aluminium, or aluminium alloy. C. Also a new piece of tubing should be cut approximately 10 percent longer than a tube to be replaced, to provide for minor variations in bending. Find out more option for  tube cutters

View Complete Details

Hydraulic Rubber Hose

  • Hose I.D. (mm) 1/4" up to 1.1/4"
  • Working pressure 30 – 110 Bar
  • Temperature Continuous: -40°C to +120°C
  • Brand HYDROFLEX

Hydroflex ®  Hydraulic Rubber Hose R3 convey hydraulic fluid to or among hydraulic components, valves, actuators, and tools. Furthermore, it is typically flexible, often reinforced, and usually with several layers of reinforcement. Hydraulic systems frequently operate at high or very high pressures. Finally dimensions, performance specifications, construction options, and features are important parameters to consider when searching for hydraulic hose. Construction options for hydraulic hose include reinforced, coiled, corrugated, or convoluted. Reinforced hose is constructed with some element of reinforcement styles include textile braid, wire braid, wire helix, and other designs in many ply or layer configurations. The most commonly use primary materials for hydraulic rubber hose include elastomers, fluoropolymers and silicone, thermoplastics, metal, and composite. Similarly you can select elastomeric or rubber hydraulic hose for their flexibility. Also fluoropolymer hose offer good flex life, superior chemical, and corrosion resistance. It can also handle high temperatures. Finally thermoplastic hydraulic hose offer tight minimum bed radius. Send us your inquiry at  centrepoint@cp-dubai.com  or  call  +971 4 885 6150 We also suggest you to visit our  Hydraulic Rubber Hose  section to compare other hoses.   Hydraulic Rubber Hose R3 hose structure consist of three parts: tube, reinforcement and cover Tube Black, oil resistant synthetic rubber Reinforcement Two high tensile textile braids Cover High quality black synthetic rubber, that makes hose resistant to abrasion, corrosion, weather, ozone, cut, oil and aging.

View Complete Details

Thermoplastic Hose

  • Working Pressure 210 – 70 Bar
  • Hose I.D. (inch) 1/8" – 1. 1/4"
  • Temperature Range -40°C to +100°C
  • Norms SAE 100 R7 – EN 855

Hydroflex R7 thermoplastic hose has medium pressure hydraulic lines  70  to  210 Bar . Hose is suitable for Hydraulic application with increased resistance to abrasion. For use with petroleum, synthetic or water based fluids in Hydraulic systems.It is also suitable for Agricultural machinery, Earthmoving, Articulating & Telescopic booms and Material handling equipments. Can be used for industrial gases and other applications, please consult manufacturer. General Information Thermoplastic hoses are common in both mobile and industrial equipment, and they are widely used in medium-to-high pressure hydraulic applications. Related products are often specified for handling compressed air and other gases, transporting chemicals, and in water-cleaning and paint-spray operations. Like its rubber counterpart, thermoplastic hydraulic hose typically has an inner tube, one or more layers of reinforcement, and a protective cover. Where they differ, as the name implies, is in the materials of construction. Thermoplastic hose also generally has one or two reinforcing layers that provide needed strength and adequate pressure-holding ability. The reinforcement layers usually have a braided construction, made from materials like polyester, polyamide or aramid fibers, or steel wire. For users, thermoplastic hose offers a number of benefits over rubber hydraulic hose. As mentioned above, these products can be formulated to easily handle extreme temperatures and environmental attack that would prematurely degrade rubber hoses. The tube typically has a smooth internal surface that permits highly efficient flow and reduces flow losses. It also tends to offer low expansion even at maximum working pressure. And the plastic tube resists erosion, which helps maintain overall system cleanliness. Another benefit is that during the production process, thermoplastic hose has a self-supporting inner tube that is cured without a mandrel. (In contrast, rubber hose is manufactured on an internal mandrel that provides support and maintains tube dimensions during processing, and it must be subsequently removed.) Therefore, thermoplastic hose can be made in extremely long lengths. Some special offshore applications take advantage of continuous hose in lengths of up to 8, 000 meters.   Hydroflex  R7 thermoplastic hose structure is composed of three parts: tube, reinforcement and cover. Tube High quality hydraulic fluids resistant thermoplastic Reinforcement High tensile textile reinforcement Cover High quality weather and hydraulic fluids resistant thermoplastic

View Complete Details

industrial air hose

  • Working Pressure 20 Bar
  • Hose I.D. (inch) 1/2" – 4"
  • Temperature Range -30° C to + 70° C

Description Medium duty multipurpose hose for air, water, and oil applications Tube Black natural and synthetic rubber tube Reinforcement High tensile textile reinforcement Cover Finally, black special rubber cover – abrasion – heat and weather resistant, smooth wrapped finish Standard length 30/40/60 mtrs Limitations Don’t use hoses that are non-oil resistant rubber in an oil environment. The non-conductive hoses have an electrical resistance of megohm per inch when subjected to 1000 volts DC. Also air hoses with a helical wire will reduce the working pressure of the assembly. Warnings Do not use non-oil resistant hoses in an oil environment. Furthermore non-conductive hoses should be used in high voltage areas.

View Complete Details

PVC Industrial Hose

  • Hose I.D. (inch) 12 – 60 mm
  • Working pressure 7 – 20 Bar
  • Temperature Range -15 °C to +60 °C

Kristaltex hose proves to be a better alternative to rubber hose, as it offers better resistance to higher working pressure. It has superior consolidation and adhesion between the braids and covers. Kristaltex hose is a multi-purpose application hose for conveying water, air, powder in factory, industry, agriculture, construction and so on. It can be also used for gardening, car spray washing, floor cleaning and other daily life uses. PVC Industrial Hose Kristaltex Reinforcement Reinforced with a high tensile quality polyester yarn, this PVC hose offers high working pressures and extreme flexibility. Furthermore, mirror smooth interior wall permits outstanding flow characteristics. Features • PVC for strength, light weight, and resistance to corrosion and abrasion. • Flexibility similar to rubber yet with longer lifespan. •Transparent, braided tubing for conveying liquids, air, and powdered foods.  

View Complete Details

PVC Steel Wire Hose

  • Material PVC
  • Color Transparent
  • Usage conveying liquid, gas, powder
  • Unit PVC Steel Wire Hose
  • Operating Temperature -5°c +60°c
  • Size 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 5", 6", 8"
  • OEM Available
  • Brand Hydroflex

QUICK OVERVIEW PVC Multipurpose SD hose  is widely used for suction and transfer of water, oil, powder, granules and light chemicals in full vacuum lines, industry pump lines, coolant lines, air conditioning systems, air and water supply lines, washing equipment, and other areas where require tight turns and sharp bends. PVC STEEL WIRE HOSE FEATURES Use PVC steel wire hose for suction and transfer of water, oil, powder, granules, light chemicals in full vacuum lines. Furthermore, you can also use it for industry pump lines, coolant lines, air conditioning systems, air and water supply lines. CHARACTERISTICS – Strong, resistant to corrosion, abrasion and weather i.e. good adaptability to hard weather condition and minus pressure; – Furthermore, excellent kink and crush resistance; – Transparent for easy flow monitoring with small bending radius; – Glass-like clarity with mirror-smooth surfaces; – Provides outstanding visual flow characteristics; – With colorful symbol lines on the structure of the hose; – Also light in weight and flexible with good cold and heat resistance.   APPLICATIONS – Suction hose of vacuum pressure; – Delivery of machine tools; – Vacuum forming machine; – Widely used as dust collector attached to wood working machineries and also sanitation lines; – Vacuum lines of audio loaders like plastic processing; – Transport of plastic granulate material and resin; – Finally, use in conveying of food grade material and fluid like water, also fruit juice in food & pharmaceutical industry.   SPIRAL STEEL WIRE PVC wrapped, steel wire is more durable, smooth, also clear inner wall.   HIGH QUALITY – Without parrafine (instead of plasticizer); – no calcium carbonate powder; – finally, no recycled PVC.

View Complete Details

Pvc Layflat Hose

  • Thickness 1-3mm
  • Color Blue
  • Model PVC Layflat Hose
  • Working Pressure 6 Bar
  • Temperature range -5~65ºC

PVC layflat hose is constructed with 3 plies of polyester yarns, one latitudinal ply and two longitudinal plies. Both tube and cover are extruded simultaneously to maximize bonding of the hose. Description Features of PVC Layflat Standard Duty 6 Bar ∎ Great durability mainly given by the reinforcement and high-density PVC material. ∎ Extra thickness in order to prevent bursting due to pressure in heavy industry. ∎ Manufactured by one step extrusion technology, higher working pressure, longer working life, different from plastic coated PVC layflat hose. ∎ PVC Layflat Hose can be easily rolled up, stored and reused, as it has a very durable construction. Applications ∎ Delivery of general liquids, including clean water, trash water, mild chemicals and industry waste water etc, an ideal lay flat pipe for construction dewatering, road building, industrial backwash, water pump industries and so on. Send us your inquiry at centrepoint@cp-dubai.com or  call +971 4 885 6150 We also suggest you to visit our PVC Industrial Hose section to compare other hoses.

View Complete Details

Agricultural Spray Hose

  • Sizes 5/16 inch, 3/8 inch, and 1/2 inch
  • Lenght 100 m / roll

Description This is popular high pressure agricultural spray hose for use with insecticides, herbicides, fertilizers, water, air, and certainly other light chemical solutions. They are high­ quality hoses that are commonly seen in nurseries, or­chards, also on spraying and lawn care equipment. Its ribbed cover reduces dragging friction and prolongs life. Features ▮ Economically priced; ▮ Ribbed cover for reduced drag and increased flexibility; ▮ In addition pin-pricked cover vents vapor helps prevent ballooning; ▮ Light weight – easily coiled after use; ▮ Longitudinal reinforcing yarns enhance coupling retention and reduce elongation under pressure; ▮ Chemical resistance of quality PVC for the transfer or spraying of “wettable powder” type chemicals; ▮ Not recommended for use with emulsifiable chemicals based on hydrocarbon carriers; ▮ Silicone-free; ▮ Finally, it is a  one-piece lengths.   Applications Excellent quality agricultural spray hose made with premium quality PVC compounds. It also ideally suits for lawn and ornamental spray applications using wettable powder chemicals. It is certainly not recommended for high pressure tree spray applications. ▮ Lawn spraying ▮ Agricultural spraying ▮ Vineyard spraying ▮ Nursery spraying ▮ Also Building washdown Send us your inquiry at centrepoint@cp-dubai.com or  call +971 4 885 6150 We also suggest you to visit our PVC Industrial Hose section to compare other hoses.

View Complete Details

Teflon Hose

This particular  Teflon  Hose   RN brand crimp ferrule is designed for Teflon hose RN crimp ferrules are typically used in applications where a safe, more durable and reliable clamping method is preferred over band clamps or strapping. When installed properly, RN crimp ferrules provides a 360° uninterrupted compression around the hose and results in a “clean” attachment with no protrusions. RN ferrules have smooth, beveled edges and are available in stainless steel or zinc plated carbon steel. They are to be installed with a hydraulic crimper and can be used on most hose shank couplings on the market.   Description RN Crimp Ferrules are chosen based on the length of the coupling barb and the actual hose outside diameter. Ferrule must fit snug over the cover of the hose prior to crimping. As a general rule, ferrule should be about 1/4″ shorter than the barb – if the ferrule is longer than the barb it will start to compromise the structure if the hose is bent near the coupling, and if the ferrule is too short then the barb will dig into the tube and lead to premature failure – therefore it is important to choose the proper length. SPECIAL NOTE:  As with hose and couplings, crimp ferrules are subject to maximum pressures, temperatures, and mechanical forces like end-pull. As a rule, the higher the temperature, the lower the maximum pressure rating for crimp ferrules. Normal operating conditions are -40F to 70/F, above that the crimp ferrule integrity will diminish. Temperature is affected by both –  the media and the environment. Critical application hoses must always be tested or certified prior to field use.

View Complete Details

Banjo Bolt Metric hose fittings

QUICK OVERVIEW Banjo Bolt Metric to be used in conjunction with our Banjo Eye fitting for fuel, air, oil etc. Good for high pressure applications Description Metric  hose fittings as part of the range of fluid connectors. Fittings are available in one piece straight, male & female, elbows 45° and 90° with swivel nuts and o-ring seal to suit SAE100R1T and R2T wire braided no skive hydraulic hose. Metric hose fittings conform to DIN & SAE standards. Applications: Industrial Hydraulics Mobile Hydraulics Marine Hydraulics Mining Industry General light Industry

View Complete Details

Metric hose fittings

Metric  hose fittings as part of the range of fluid connectors. Fittings are available in one piece straight, male & female, elbows 45° and 90° with swivel nuts and o-ring seal to suit SAE100R1T and R2T wire braided no skive hydraulic hose. Metric hose fittings conform to DIN & SAE standards. DIN specifications are controlled by Germany, but other countries use them as a reference for their connector and port designs. All metric fittings are measured in millimeters. Unless otherwise specified, the size refers to the outside diameter. Description Applications: Industrial Hydraulics Mobile Hydraulics Marine Hydraulics Mining Industry General light Industry

View Complete Details

Male Connector JIC

QUICK OVERVIEW The Society of Automotive Engineers (SAE) specifies a 37° angle flare or seat be used with high pressure hydraulic tubing. These are commonly called JIC couplings. The JIC 37° flare male will mate with a JIC female only. The JIC male has straight threads and a 37° flare seat. The seal is made on the 37° flare seat.

View Complete Details

Heavy Duty King Nipple

  • Material Aluminum, SS316
  • Type Heavy Duty
  • Pressure Up to 300 PSI
  • Size 2" – 12"
  • Thread Type BSP or NPT

QUICK OVERVIEW RN® brand Heavy Duty King Nipples are used in fluid applications where a safe, consistent, and reliable end configuration is required. They feature an interlock groove that is designed to accommodate “interlocking crimped ferrules” for ultimate holding power.   Description Specification of Heavy Duty King Nipples Heavy Duty King Nipples also known as King Combination hose ends or KC Nipples, are widely used on industrial hose assemblies for use with liquids at 150 PSI or less. Recommended Use • Recommended for low pressure discharge and suction service of compatible liquids. • Not for compressible products such as gases – air – nitrogen – oxygen, etc. • Not for use with steam • The maximum working pressure may vary due to the construction of the hose or the type of hose clamp used to the secure the hose end. • For additional information, contact Central States Hose. Please check out the rest of our store for king nipples.

View Complete Details

Groove King Nipple

  • Size 1/2" – 12"
  • Material Aluminum, SS316
  • Type Groove Type KC Nipple
  • Thread Type: BSP or NPT

QUICK OVERVIEW RN® Groove King Nipples are recommended for low pressure discharge and suction service for compatible liquids not for compressible products such as air oir nitrogen on sizes 1 1/4″ and above. Description Specification of Groove King Nipples Groove King Nipples also known as King Combination hose ends or KC Nipples, are widely used on industrial hose assemblies for use with liquids at 150 PSI or less. Recommended Use • Recommended for low pressure discharge and suction service of compatible liquids. • Not for compressible products such as gases – air – nitrogen – oxygen, etc. • Not for use with steam • The maximum working pressure may vary due to the construction of the hose or the type of hose clamp used to the secure the hose end. • For additional information, contact Central States Hose. Please check out the rest of our store for king nipples.

View Complete Details

Hose Mender

  • Material Aluminum, SS
  • Size 1/2" – 10"

QUICK OVERVIEW Hose Mender is used for repairing hose assemblies. Simply cut out the bad section of hose, insert the mender into the loose hose ends, and clamp into place. You will have your hose repaired in minutes!  Use our heavy duty hose clamps with this mender. Description Hose Mender Description Use hose mender to repair broken hoses or to permanently connect two hoses of the same size. Hose is pushed over mender and worm gear clamps or band type clamps are tightened over outside of hose to secure mender. • hose mender connects hose in a straight run • Fitting connects to hose on both ends • Plated steel for strength and resistance to rust • Barbed fitting creates a tight seal on flexible and semi-rigid hose • For use with a hose clamp, crimp sleeve or ferrule (sold separately)   Safety Alert • They are not for compressible products such as air, nitrogen or steam. • The working pressure may vary with construction of the hose, the type of clamping system used and the application. • Consult the factory for recommendations.

View Complete Details

Heavy Duty Ferrules

  • Size 2" – 12"
  • Type Heavy Duty
  • Material Aluminum, SS
  • Pressure Up to 300 PSI

QUICK OVERVIEW RN Heavy Duty Ferrules offers a low profile streamline appearance with maximum retention. Suitable for air and water service only. Can not be used for steam services. Description Heavy Duty Ferrules General Uses: Use heavy duty ferrules in conjunction corresponding stems to provide a permanent end connection to rubber industrial hoses. Limitations: The material of the ferrules is compatible with all materials possible to be exposed. Therefore this includes both – the transferrable materials as well as external materials. Furthermore, use proper equipment to crimp the ferrules onto the assembly. In conclusion, for maximum coupling retention, lock heavy duty ferrule into the hose shank locking collar. Warnings:  The uses of crimped ferrule / sleeve on a cam and groove fittings to old MIL-C-27487 will result in damage to the hose assembly. Therefore please be aware!   Applications Tank Truck, Chemical, Mud Suction, Oil discharge, Water discharge, Water suction, Water Jetting, Hot Tar & Asphalt, Material handling, Textile Air Hose, Wire Air Hose, Petroleum, Marine, Dredge and Multi Purpose Hose.

View Complete Details

Suction Hose Coupling Female

  • Material Aluminium body with Brass nut

QUICK OVERVIEW Aluminum/Brass Suction Hose Couplings are built of lightweight aluminum with brass pin-lug nut for long lasting durability. Suction Hose style assures strength and reliability. Can be used with hoses capable of handling water or other liquids, providing increased adaptability. Will require clamps to attach hose. Available in sizes 1-1/2″-6″ as Female, Male and Coupling Set. Description General Uses of Suction Hose Coupling: Low pressure liquid transfer, suction and discharge. Fitting styles include: shank couplings, suction hose coupling, pin lug couplings, garden hose couplings, and other shank fittings not meeting the specific requirements of the other categories. This category does not include cam & groove, ground joint or universal fittings. Limitations: Pressure ratings only apply to non-toxic and non-combustible liquids; careful consideration must be given to dangerous or volatile liquids. Unusual ends other than NPT, NPSM or NPSH threaded parts may also effect pressure ratings, consult manufacturers of those connections and/or accessories for pressure ratings. This section may also apply to menders or other shank style fittings.

View Complete Details

Light Duty Ferrule

  • Material Aluminum, SS
  • Working Pressure 250 PSI

QUICK OVERVIEW RN® Light Duty Ferrules with a smooth inside, shorter , to provide a light weight solition for lower pressure applications. For use with crimp style shanks. Available in sizes 1/4″ to 4″. Description Light Duty Ferrule General Uses: Use Light duty ferrule on hose for low pressure air (1/2″ size or smaller), water, welding, and various other fluids (non-critical applications). Also install them using a crimping machine to provide a smooth, uniform grip on the hose barb. Limitations: The material of the ferrules must be compatible with all materials to which it may be exposed. Therefore this includes both – the materials being transferred as well as external materials. Furthermore, use proper equipment to crimp the ferrules onto the assembly. In conclusion, for maximum coupling retention, lock heavy duty ferrule into the hose shank locking collar. Warnings:  The uses of crimped ferrule / sleeve on a cam and groove fittings to old MIL-C-27487 may result in damage to the hose assembly.   Recommended for use on: most one and two wire braid reinforced hoses; fiber reinforced (braided or spiraled) with or without helical wire such as: oil and suction discharge hose; barge and dock loading and unloading hose;  L.P. gas hose; anhydrous ammonia hose; acid chemical hose and high pressure air and water hose.

View Complete Details

Bauer Coupling

  • Material Carbon Steel

QUICK OVERVIEW Bauer Coupling is built of lightweight aluminum with brass pin-lug nut for long lasting durability. Suction Hose style assures strength and reliability. Can be used with hoses capable of handling water or other liquids, providing increased adaptability. Will require clamps to attach hose. Available in sizes 1-1/2″-6″ as Female, Male and Coupling Set. Description General Uses of Bauer Coupling: Bauer coupling provide a quick and easy way to join many lengths of hose together. Low pressure liquid transfer, suction and discharge. Fitting styles include: shank couplings, suction couplings, pin lug couplings, garden hose couplings, and other shank fittings not meeting the specific requirements of the other categories. This category does not include cam & groove, ground joint or universal fittings. Limitations: Pressure ratings only apply to non-toxic and non-combustible liquids; careful consideration must be given to dangerous or volatile liquids. Unusual ends other than NPT, NPSM or NPSH threaded parts may also effect pressure ratings, consult manufacturers of those connections and/or accessories for pressure ratings. This section may also apply to menders or other shank style fittings.

View Complete Details

Type A Female Adaptor

  • Type Type A – Adapters x Female Thread
  • Material Aluminium, Brass, and SS316
  • Size 1/2" – 8"
  • Sealing Materials No gasket or thread seal applied
  • Thread Types Standard BSP-Parallel, BSP-Tapered or NPT available
  • Working pressure Aluminum (50 – 250 psi) Brass (50 – 250 psi) SS316 50-250 psi)
  • Standard A-A-59326 / MIL-C-27487

QUICK OVERVIEW RN® Type A camlock couplings have male adaptors & female threads of the same size. The male grooved end can be inserted into any female couplers such as Type D, B, C & Dust Cap with identical size. Various gaskets are provided. Camlock Coupling Description Use camlock couplings to connect flexible hoses to each other or a flexible hose to a firm pipe, and just as rapidly disconnect them. When you slide two parts together, and close the camlock levers, you’ll get a leak-free connection. Furthermore camlocks has self-locking arms for highest safety. The coupling has a simple and robust design in which the locking arm has an additional lockingwhich prevents accidental disconnection. It locks itself automatically and stays locked until you open it. Aluminum Camlock Couplings Aluminum camlock couplings are a lightweight, and robust camlock option with excellent corrosion resistance. Use aluminum camlock couplings in water, petroleum and chemical transfer. Aluminum camlocks are light yet strong offering a quality price performance cam and groove option. Stainless Steel Camlock Couplings Stainless steel camlock coupling are more robust and durable then other material camlocks. Therefore stainless steel camlock couplings are also ideal for use in corrosive circumstances. Our camlock couplings provide a durable, low maintenance solution, and often work out the least expensive long-term solution. Brass Camlock Couplings: Brass material camlock couplings have excellent corrosive resistance against water, hydraulic oil, coolants, gasoline and petroleum products. In addition you can use brass material camlock couplings in special places such as in marine fueling applications. Limitations: Carefully select a body, arm and gasket material that is compatible with the material being transferred through the coupling. If the assembly is to be swaged or crimped, we recommend a shank specifically designed for swaging or crimping. For maximum coupling retention, use an interlocking collar. Warnings: Never use camlock couplings for steam service!

View Complete Details

Camlock-Type C Coupling

  • Material Aluminium, Brass, and SS316
  • Type Type C – Coupler x Hose Shank
  • Working Pressure Aluminum (50 – 250 psi) Brass (50 – 250 psi) SS316 50-250 psi)
  • Size 1/2" – 8"
  • Sealing Materials NBR gasket applied for all except EPDM for PP couplings
  • Standard A-A-59326 / MIL-C-27487

QUICK OVERVIEW RN® Camlock Coupling Type C couplers are generally used with the same size Type E adapters, however, Type A and F adapters are compatible, as well as the DP (Dust Plug). Available in Aluminum, Brass and Stainless steel material. Material:  Aluminum, Brass and Stainless Steel Camlock Coupling Type C Description Use camlock coupling type B to connect flexible hoses to each other or a flexible hose to a firm pipe, and just as rapidly disconnect them. When you slide two parts together, and close the camlock levers, you’ll get a leak-free connection. Furthermore camlocks has self-locking arms for highest safety. The coupling has a simple and robust design in which the locking arm has an additional lockingwhich prevents accidental disconnection. It locks itself automatically and stays locked until you open it. Aluminum Camlock Couplings Aluminum camlock couplings are a lightweight, and robust camlock option with excellent corrosion resistance. Use aluminum camlock couplings in water, petroleum and chemical transfer. Aluminum camlocks are light yet strong offering a quality price performance cam and groove option. Stainless Steel Camlock Couplings Stainless steel camlock coupling are more robust and durable then other material camlocks. Therefore stainless steel camlock couplings are also ideal for use in corrosive circumstances. Our camlock couplings provide a durable, low maintenance solution, and often work out the least expensive long-term solution. Brass Camlock Couplings: Brass material camlock couplings have excellent corrosive resistance against water, hydraulic oil, coolants, gasoline and petroleum products. In addition you can use brass material camlock couplings in special places such as in marine fueling applications. Limitations: Carefully select a body, arm and gasket material that is compatible with the material being transferred through the coupling. If the assembly is to be swaged or crimped, we recommend a shank specifically designed for swaging or crimping. For maximum coupling retention, use an interlocking collar. Warnings: Never use camlock couplings for steam service!

View Complete Details

Camlock-Type F Adapter

  • Material Aluminium, Brass, and SS316
  • Type Type F – Adapter x Male Thread
  • Size 1/2" – 3×4
  • Sealing Materials No gasket or thread seal applied
  • Working pressure Aluminum (50 – 250 psi) Brass (50 – 250 psi) SS316 100-150 psi)
  • Standard A-A-59326 / MIL-C-27487
  • Thread Types Standard BSP-Tapered, NPT available

QUICK OVERVIEW RN® Camlock Coupling Type F couplers are generally used are normally used with Type B, C, D or DC couplers with the same size. Material:   Aluminum, Brass and Stainless Steel Camlock Coupling Type F Description Use camlock coupling type F to connect flexible hoses to each other or a flexible hose to a firm pipe, and just as rapidly disconnect them. When you slide two parts together, and close the camlock levers, you’ll get a leak-free connection. Furthermore camlocks has self-locking arms for highest safety. The coupling has a simple and robust design in which the locking arm has an additional lockingwhich prevents accidental disconnection. It locks itself automatically and stays locked until you open it. Aluminum Camlock Couplings Aluminum camlock couplings are a lightweight, and robust camlock option with excellent corrosion resistance. Use aluminum camlock couplings in water, petroleum and chemical transfer. Aluminum camlocks are light yet strong offering a quality price performance cam and groove option. Stainless Steel Camlock Couplings Stainless steel camlock coupling are more robust and durable then other material camlocks. Therefore stainless steel camlock couplings are also ideal for use in corrosive circumstances. Our camlock couplings provide a durable, low maintenance solution, and often work out the least expensive long-term solution.   Brass Camlock Couplings: Brass material camlock couplings have excellent corrosive resistance against water, hydraulic oil, coolants, gasoline and petroleum products. In addition you can use brass material camlock couplings in special places such as in marine fueling applications. Limitations: Carefully select a body, arm and gasket material that is compatible with the material being transferred through the coupling. If the assembly is to be swaged or crimped, we recommend a shank specifically designed for swaging or crimping. For maximum coupling retention, use an interlocking collar. Warnings: Never use camlock couplings for steam service!

View Complete Details

Safety Whip Check Cable

  • Material Standard carbon steel with aluminium buckles
  • Unit Safety Cables for Hose-to-Hose Service
  • Available Sizes 1/4", 1/8", 3/8"
  • Maximum Pressure 200 PSI

QUICK OVERVIEW RN® Safety Whip Check Cables are available in two cable diameters and a number of different configurations. Whipcheck offer additional safety for compressor hoses in enclosed or critical enviroments. Easy to use, low cost, safety cables to help prevent injury if a hose connection separates. They can attach hose to hose or hose to equipment. They are highly resistant to rust and corrosion and do not require any tools to install. Safety Whip Check Cable Features – A strong safeguard for air hose connections; –  Safety Whip Check Cable helps you meet today’s safety standards; –  Install it in the extended position (no slack); –  Cable reaches across hose ttings to provide standby safety for hose; –  Spring-loaded loops in the cable ends open easily to pass over the couplings for a rm grip on the hose; –  No tools needed – easy to install and remove; –  Also highly resistant to rust and corrosion; –  When hose, couplings or clamps fail, or there is an accidental separation of the assembly,  Safety Whip Check Cable minimize damage to equipment and injuries to operators. A positive safeguard for air hose connections – helping you meet today’s safety standards.   Keeping the workplace safe with Safety Whip Check Cable Safety Whip Check Cable is a retention system designed to stop hoses which have become disconnected from a piece of equipment. When hoses, couplings or clamps fail,  Safety Whip Check Cables  minimize damage to equipment and injuries to operators. In addition Check Cables reaches across the hose fittings to provide standby safety for hose. Furthermore loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Install Check Cable in the extended position (no slack). Centre Point Hydraulic  maintains the most complete inventory of Ground Joint Fittings in the Middle East and Africa, ready to ship to meet your company’s needs. Furthermore, we can provide you with free consultation, and quotation through +971 4 885 6150 or centrepoint@cp-dubai.com

View Complete Details

Rubber Gasket

  • Standard Materials Black NBR
  • Sealing Black NBR washer is usually supplied for carbon steel fittings Black EPDM is attached for stainless
  • Working Temp. NBR from – 10 to 80°C, EPDM from -20 to 130°C, FPM from -20 to 180°C

QUICK OVERVIEW RN® Rubber Gasket are used to connect air lines from compressors or other air source to all types of pneumatic tools and equipment. All 2 lug head connections are of one size for easy interchange. Hose shank or threaded end is coupling size. Male and Female threads are NPT. Rubber Gasket general description Rubber Gasket prevent leaks between separate substrate sections. It has good elongation properties, as well as adequate resilience, tensile and compression set. High performance gaskets When looking for a high performance seals, they often lack the ability to remain durable if an application comes in contact with oils. For these situations, consider using Nitrile Butadiene Rubber, also known as NBR, gaskets. Nitrile  material is one of the few rubbers that are particularly resistant to petroleum, mineral, and vegetable oils, as well as some acid solutions and water. These industrial seals you will find in automotive, aeronautical, food service and sewer applications due to their specialized oil resistant properties.   Rubber Gasket Applications Our customers use gaskets in a wide variety of applications in a diverse range of environments. In addition gasket types include o-rings, which are the most common type of gasket made of synthetic rubber. Resistance • Resistant to mineral oil • Resistant to vegetable oil • Impervious to benzene/petrol • Impervious to ordinary diluted acids and alkalines

View Complete Details

Triple Connection Universal Air Coupling

  • Type Triple Connection
  • Item Universal Coupling
  • Standard Materials Standard bluish or yellow carbon steel
  • Sealing Materials Standard Black NBR for plated steel couplings
  • Max. Pressure (PSI) 110
  • Design Common Head, Eliminates Mismatched Fitting and Allows Direct Connection

QUICK OVERVIEW Universal Air Coupling is designed for air and water service and provides a quick connection between three lengths of hose; or length of hose and a male or female NPT outlet. In sizes 1/4 inch to 1 inch all heads are the same and are interchangeable regardless of the hose shank or NPT thread size. Connections made by pressing the two heads together and applying a quarter-turn. The locking pin is placed in the hose to provide a safe connection. General Information of Triple Connection Universal Couplings Triple Connection Universal Couplings, also known as “Chicago Couplings” or “Air King” series couplings, feature a simple quarter turn to connect. These couplings are commonly installed on air hose assemblies that connect pneumatic tools to their compressed air source. Firmly pressing one coupler to another and twisting seals the connection. Safety clips prevent accidental disconnection during use. Universal couplings are a convenient quick connect system to mate varying diameters of hose, as all sizes up to 1 inch interchange with one another. Yet sizes over 1 inch have a four lug design which also interchange with all other sizes in the four lug style. In addition universal couplings do not interchange with sandblast, Minsup, or European style couplings of similar style. Finally lubricate the gasket for easier connection. Warnings: Safety pins, clips or wires should always be installed in couplings. Finally never use universal air couplings for steam service.   Applications • For medium to high pressure compressed air applications • Oil refineries • Chemical plants • Offshore rigs • Industrial applications Benefits • Locking head conforms to American standard • Safety lock pin • Quick action Limitations for Universal Coupling Hose End Universal Air Couplings have a maximum pressure rating of 110 PSI

View Complete Details

Nozzle Holder

QUICK OVERVIEW A sleeve type coupling that is secured to the hose with wood screws and have the same features as the sandblast hose end. The exception is that the hose end of the nozzle holder is NPT threaded to accept the sandblasting nozzle. Description Sandblast Nozzle Holder General Uses Design of Sandblast Nozzle holder is to slip over sandblast hose and to be fastened with screws. Such an external coupling prevents restriction of flow and prevents coupling wear out from the high velocity of sand. Limitations: Since these fittings attach to the outside of the hose, use them only with sandblast hose. Therefore take special care not to let the screws penetrate the hose tube. Warning: Use these fittings  with sandblast hose only! Features •  We supply Sandblast Quick Couplings with screws. Installation • Cut ends of hose square to fit snug against metal end. • Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180° from first to ensure best centering. • After all screws have been placed, finally check tube opposite screws to be sure screws have not penetrated completely through. • On quick couplings, insert safety clips.

View Complete Details

Sandblast Female NPT Adapter

QUICK OVERVIEW A coupling that doesn’t fit the hose, but rather is threaded onto the sandblast pot. Once properly threaded to the discharge pipe on the pot, the 2-lug crowfoot design of the hose end. Now the pot can supply mix to the operator by way of the hose to sandblast nozzle.   Description General Uses: Designed for used on sandblast hose Limitations: Since these fittings attach to the outside of the hose, they are to be used only with sandblast hose. Special care must be taken not to let the screws penetrate the hose tube. Warning: These fittings are designed to be used with sandblast hose only

View Complete Details

Boss Wing Nut

  • Type Boss Wing Nut by Female Thread
  • Item Ground Joint Fitting
  • Sizes Available 1/2" – 2"
  • Standard Material Standard Materials bluish plating carbon steel
  • Thread Types Female NPSM thread type
  • Working Temperature Recommended for steam service up to 232°C

QUICK OVERVIEW RN® Ground Joints are an all purpose coupling that consists of a Male Stem, Wing nut, and a Female Spud. They are widely used for air, water, or steam and are secured with an interlocking clamp. Boss Wing Nut Applications Boss Wing Nut couplings are all purpose hose couplings, therefore universally recommended for steam hose connections. Furthermore they are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1″ ID. Use Ground joint couplings supply a convenient threaded fitting to connect two lengths of hose, and a single length to a male or female threaded outlet   Features • The spud part of the coupling serves as one half of the Boss Ground Joint connection therefore it is usually fixed to the equipment. As a result stem part that is clamped to the hose is the other half. The two halves are connected or disconnected by rotating the wing nut on the spud. Finally when connected they achieve both a mechanical, and a pressure seal. • Easy to seal Safety Precautions • 175 PSI Maximum recommended operating pressure: coupling joint only – not hose retention. • Use safety clips in holes provided on each coupling. Use steel safety cables to guard against accidental separation of lines.

View Complete Details

Swivel Flange

  Swivel flange ring of of 150LB or 300LB. Zinc Treated, carbon steel or stainless steel body.

View Complete Details

Threaded Flange

Swivel flange ring of of 150LB or 300LB. Zinc Treated, carbon steel or stainless steel body.

View Complete Details

Forged Brass Mini Ball Valve

  • Feature simple construcion, easy maintenance, small fluid resistance, suitable for regular operations, light
  • Body Forged brass single piece
  • Ball Forged brass Hard chrome plated mirror smooth finish
  • Stem Seals Double “O” rings
  • Handle Nylon
  • Pressure Rating Fluids 40Kg
  • Temperature Rating Fluids -15℃ to +100 ℃

Brass Mini Ball Valve use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Description Brass Mini Ball Valve Features ▮ brass mini ball valve is made of brass ▮ Regulate and control air, oil and water ▮ Suitable for regular operation, lightweight ▮ Small fluid resistance ▮ Simple construction ▮ Easy maintenance ▮ Good sealed performance ▮ Freedom from installation direction Learn more about other ball valves Centre Point Hydraulic can supply!   General Information Mini ball valves consist of chrome/nickel-plated brass for higher corrosion resistance than regular brass or steel; mini ball valves are most simple and common kind of valve. Inside the housing there is a metal ball with hole through it. By using valve lever operator can rotate the ball thus opening or closing the path for the medium. Industrial miniature ball valves for use as a shut-off valve in water, air and general fluid service. These valves come in sizes from 1/8 inch to 1/2 inch.

View Complete Details

Brass Mini Ball Valve

  • Size 1/4”, 3/8” & 1⁄2”
  • Body brass single piece
  • Ball Forged brass Hard chrome plated mirror smooth finish
  • Seat Pure P.T.F.E. Conical arc cut
  • Steam Seals Double “O” rings
  • Handle Nylon
  • End BSP female threads
  • Pressure Rating Fluids 40Kg
  • Temperature Rating Fluids -15° C to +100° C

Mini ball valves are made of chrome/nickel-plated brass for higher corrosion resistance than regular brass or steel; mini ball valves are most simple and common kind of valve. Inside the housing there is a metal ball with hole through it. By using valve lever operator can rotate the ball thus opening or closing the path for the medium. Industrial miniature ball valves for use as a shut-off valve in water, air and general fluid service. These valves come in sizes from 1/8 inch to 1/2 inch. Description Brass Mini Ball Valve Features ▮ brass mini ball valve is made of brass ▮ Regulate and control air, oil and water ▮ Suitable for regular operation, lightweight ▮ Small fluid resistance ▮ Simple construction ▮ Easy maintenance ▮ Good sealed performance ▮ Freedom from installation direction Learn more about other ball valves Centre Point Hydraulic can supply!   General Information Mini ball valves consist of chrome/nickel-plated brass for higher corrosion resistance than regular brass or steel; mini ball valves are most simple and common kind of valve. Inside the housing there is a metal ball with hole through it. By using valve lever operator can rotate the ball thus opening or closing the path for the medium. Industrial miniature ball valves for use as a shut-off valve in water, air and general fluid service. These valves come in sizes from 1/8 inch to 1/2 inch.

View Complete Details

Brass Gate Valve

QUICK OVERVIEW Featuring brass construction and twist handle operation, gate valves are designed to control water flow, allowing water isolation and pipes/taps to be shut off at the point of the gate valve. Brass gate valve maintenance Screw the packaging gland properly when leakage occurs stem and to tighten in 1/8 to 1/4 turn increments until leak stops. Caution Do not disassemble valve while under pressure nor with entrapped hazardous fluids therein.   Threaded End Gate Valve Make sure all surfaces are clear and free of debris on the piping connection. Use teflon tape or approved sealant is recommended. Prepare two smooth-jawed adjustable wrenches when installing the valve. A loosely fitting pipe wrench can distort the valve and causes a leak. Apply one wrench on the hex nearest the joint being tightened to prevent breaking the seal between the end cap and body of the valve.

View Complete Details

Low Pressure Ball Valve

QUICK OVERVIEW Ball valves are suitable for general water services, heating, air conditioning plants, compressed air systems. Brass Ball Valve Operation To open or close the valve, turn the handle 1/4 turn (90 degrees) In open position – the handle rotation is counterclockwise and the handle is parallel with the valve. In close position – the handle rotation is clockwise and the handle is perpendicular with the valve. Threaded End Ball Valve Make sure all surfaces are clear and also free of debris on the piping connection. Use teflon tape or approved sealant! Prepare two smooth-jawed adjustable wrenches when installing the valve. A loosely fitting pipe wrench can distort the valve and causes a leak. Finally, apply one wrench on the hex nearest the joint being tightened to prevent breaking the seal between the end cap and body of the valve.

View Complete Details

Single Acting Check Valve

QUICK OVERVIEW Bolev® Single Acting Check Valve used to adjusting flow rate at a pipe line, very compact, accurate and easy to use. Description Single Acting Check Valve Features: • BSP (ISO 228) thread; • heat treated Carbon Steel needle, long life, wear resistance; • accurate flow control; • lockable adjusting knob; • one way flow control valve, other way free flow; • check valve burst pressure 0.5bar; • mounting nuts available on additional order.

View Complete Details

Flow Control Valve without check

QUICK OVERVIEW Bolev® Single Acting Check Valve used to adjusting flow rate at a pipe line, very compact, accurate and easy to use. Double Flow Control Valve Features: • Double flow control valves has BSP (ISO 228) thread; • heat treated Carbon Steel needle, long life, wear resistance; • accurate flow control; • lockable adjusting knob; • one way flow control valve, other way free flow; • check valve burst pressure 0.5bar; • mounting nuts available on additional order.   Control valves, or called: throttle valve, it is only a flow control needle valve which designed without check valve, it can control flow rate at both direction, very good to regulating hydraulic flow in a system. It has following characteristics: 1. heat treated needle, wear resistance, long working life; 2. precise machined needle, accurate adjusting; 3. compact and safe 4. easy to use; 5. lockable adjusting knob; 6. mounting nuts available on additional order;

View Complete Details

Straight Check Valve

Description Full Ports One Way Air Check Valve Features ▮ Made of brass material, have corrosion resistance and good flexibility. ▮ Fittings connected securely and high voltage capability high, tightness and repetition is good, easy installation and maintenance, job security and reliability. ▮ Applicable medium: oil, water, gas and other non-corrosive or corrosive media.   Applications Use for boiler and pressure vessel, petroleum, chemical, shipbuilding, pharmaceutical, metallurgy, machinery, food and other industries.

View Complete Details

Brass Swing Check Valve

  • Material Brass
  • Size 1/2"–4”
  • Working Medium General oil, Gas & Water applications
  • Nominal Pressure 600 psi WOG
  • Working Temperature t≤100° C

QUICK OVERVIEW Brass swing check valves keeps fluids from backing up into the water supply and prevents backflow from wells and boiler systems. This check valve is lead free and suitable for all potable water supply installations. It is constructed of brass for strength and durability. Description Brass Swing Check Valve have a screwed cap, swing type disc and integral seat. They prevent backflow while offering full flow performance with a minimum of turbulence or pressure loss. Recommended for residential and commercial applications. Brass Swing Check Valve Features ▮ RN® brass swing check valve prevents backflow by automatically closing when fluid reverses direction. ▮ Swing checks may be installed in horizontal positions (or vertical with flow moving up)

View Complete Details

Brass Vertical Check Valve

  • Material Brass
  • Working Medium Water, Oil, Gas
  • Nominal Pressure 1.0MPa
  • Working Temperature t≤100° C

QUICK OVERVIEW Brass Vertical Check Valves are made for back flow prevention. The internal spring creates a fast and firm seal, while regulating the valves cracking pressure at 5 lbs. Description Features ▮ Suitable for full range of liquids and gas ▮ Oil resistant, resistant to corrosion ▮ For checking control valve, prevent water, gas, oil reflux; ▮ Able to discharge sewage and gas, environmentally friendly and durable.

View Complete Details

Brass Foot Valve

  • Material Brass
  • Nominal Pressure 1.0MPa
  • Working Medium Water, Oil, Gas
  • Working Temperature t≤100° C

Suitable for suction lines on top-offtake tanks (where an anti-siphon valve is not present). These valves are often used in dispensing pump systems, particularly with Centrifugal pumps, to prevent the pump from de-priming during rest. Suitable for use with water, Oil, Diesel, and many other none toxic acid free fluids. The check valves are uni-directional; in the sense that they manage the flow in one direction only, which is indicated by the arrow on the body. The valves are composed by a spring, a little valve and a couple of parts made of brass (body and end-adapter) which contain them and that are assembled by means of threat and a sealed material to obtain their aim.   Description Brass Foot Valve Features ▮ Foot valve ▮ Suitable for the suction lift of water oil and not corrosive fluids ▮ Installation is recommended only in vertical position

View Complete Details

Brass Strainer

  • Material Brass
  • Nominal Pressure 1.6MPa
  • Working Medium Water
  • Working Temperature t≤100° C

As a refresher, Brass strainers or y-strainers are pipe fittings which remove particulates from liquids or gas via a filtering element intersecting the main channel. Y-strainers help protect valuable downstream equipment – like pumps, steam traps, regulators and measuring devices – which might be damaged by contaminants. Brass strainers are most often used in applications which don’t require frequent cleaning and where the amount of the materials to be removed is relatively low.   Description Brass strainer features ▮ Easy installation ▮ Dimensional accuracy ▮ Fine finish

View Complete Details

Flat Face hydraulic quick couplings

Flat Type hydraulic quick couplings are used for quick change of hydraulic tools in construction, railway maintenance and mining industries. The ease of cleaning makes them ideal for use in these types of hostile environments Description ∎ Sleeve locking mechanism in engaged by rotating sleece after connection. It prevents accidental disconnection when the coupling is dragged along the ground. Sleeve mechanism is designed to help prevent dirt from entering the internal mechanism and thus avoid the faulty operation during connecting or disconnecting. ∎ Critical parts are hardened for durability. ∎ These couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid would be lost during disconnection or air inclusion during reconnection.   ∎ Conforms to ISO5675 ∎ Compatible with Parker FE, and FE Series, STUCCHI A8008 Series, EROQUIP FD 89 Series, HANSEN QA2900 Series.

View Complete Details

Wing Nut Coupling

Wing Nut  is designed for industrial applications that require couplings to be connected and disconnected under pressure with little to no fluid loss.  Wet-line couplers are commonly used on live bed / dump trailer wet-line hydraulic systems and other heavy duty applications. Description Thread together latch provides connect under pressure capability and vibration resistance. Includes body and tip. Heavy duty, thread-to-connect design can be connected under pressure, with little or no spillage. Wing Nut Coupling Features ▮ Wing nut coupling brass body coupler and nipple prevents corrosion ▮ Heavy-duty steel sleeve and wing nut ▮ Nitrile seal with Teflon backup ▮ 3000 PSI working pressure rating ▮ 3/4″ NPT Female Pipe Thread Used For ▮ Oil well equipments ▮ Heavy equipments ▮ Live bed trailers ▮ Sand and salt spreaders ▮ Mobile drilling rigs See also  quick release couplings  that Centre Point Hydraulic can supply!

View Complete Details

Socket Nut

  • Material Brass
  • Working pressure Less than 145 Psi; Max pressure: 150 Psi
  • Air flow 35 SCFM at 100 PSIG inlet with 10 PSIG pressure

Socket Nut has proven and positive connection using ball-locking mechanism. It is used for air tools and air compressors. Description General Information Quick couplers  has one touch quick coupler and two touch quick coupler. As material, there are steel quick coupler, brass quick coupler. Coupler has two parts, one is socket, the other is plug, socket is usually check valve. Quick coupler can be used for air tools, air compressors, air blow gun, spray gun. So it’s also called air tools kits, air tools couplers, air tools accessories, pneumatic tools coupler, air tools coupling, air compressor accessories, air compressor kits, air compressor coupler. Application Air compressors,  Pneumatic air tools and hoses,  Water lines,  Grease guns,  Cleaning equipment,  Paint applicators,  Drop-down air lines,  Blow guns,  Paint applicators   Socket Nut Quick Coupler Features ▮ Socket nut quick coupler sleeve guard helps to prevent accidental disconnection when in use. ▮ Manual sleeve, single shut off quick couplings. ▮ High flow steel valves with minimal pressure drop for efficient performance. ▮ Stainless steel springs, locking balls and brass valves are also offered for corrosion resistance. ▮ Finally, optional sleeve-lock adds protection against accidental disconnection. There are also other types of  air compressor fittings  you can find in your range of products!

View Complete Details

Auto Coupling Socket Hose

QUICK OVERVIEW Auto Coupling Socket Hose has proven and positive connection using ball-locking mechanism. It is used for air tools and air compressors. Description Quick couplers has one touch quick coupler and two touch quick coupler; As material, there are steel quick coupler, brass quick coupler, Coupler has two parts, one is socket, the other is plug, socket is usually check valve. quick coupler can be used for air tools, air compressors, air blow gun, spray gun. So it’s also called air tools kits, air tools couplers, air tools accessories, pneumatic tools coupler, air tools coupling, air compressor accessories, air compressor kits, air compressor coupler. Application Air compressors,  Pneumatic air tools and hoses,  Water lines,  Grease guns,  Cleaning equipment,  Paint applicators,  Drop-down air lines,  Blow guns,  Paint applicators   Features  – Manual sleeve, single shut off quick couplings. – High flow steel valves with minimal pressure drop for efficient performance – Sleeve guard helps to prevent accidental disconnection when in use – Optional sleeve-lock adds protection against accidental disconnection – Stainless steel springs, locking balls and brass valves are also offered for corrosion resistance

View Complete Details

Plug Hose

Quick connector to hose barb. Great for attaching a male quick connect to the end of air hose. Simply slide the hose over the end of the hose barb and clamp on. Description Quick couplers has one touch quick coupler and two touch quick coupler; As material, there are steel quick coupler, brass quick coupler, Coupler has two parts, one is socket, the other is plug, socket is usually check valve. quick coupler can be used for air tools, air compressors, air blow gun, spray gun. So it’s also called air tools kits, air tools couplers, air tools accessories, pneumatic tools coupler, air tools coupling, air compressor accessories, air compressor kits, air compressor coupler. Application Air compressors,  Pneumatic air tools and hoses,  Water lines,  Grease guns,  Cleaning equipment,  Paint applicators,  Drop-down air lines,  Blow guns,  Paint applicators   Features  – Manual sleeve, single shut off quick couplings. – High flow steel valves with minimal pressure drop for efficient performance – Sleeve guard helps to prevent accidental disconnection when in use – Optional sleeve-lock adds protection against accidental disconnection – Stainless steel springs, locking balls and brass valves are also offered for corrosion resistance

View Complete Details

plug nut

Plug Nut has proven and positive connection using ball-locking mechanism. It is used for air tools and air compressors. Description General Information Quick couplers  has one touch quick coupler and two touch quick coupler. As material, there are steel quick coupler, brass quick coupler. Coupler has two parts, one is socket, the other is plug, socket is usually check valve. Quick coupler can be used for air tools, air compressors, air blow gun, spray gun. So it’s also called air tools kits, air tools couplers, air tools accessories, pneumatic tools coupler, air tools coupling, air compressor accessories, air compressor kits, air compressor coupler. Application Air compressors,  Pneumatic air tools and hoses,  Water lines,  Grease guns,  Cleaning equipment,  Paint applicators,  Drop-down air lines,  Blow guns,  Paint applicators   Plug Nut Quick Coupler Features ▮ Plug Nut quick coupler sleeve guard helps to prevent accidental disconnection when in use. ▮ Manual sleeve, single shut off quick couplings. ▮ High flow steel valves with minimal pressure drop for efficient performance. ▮ Stainless steel springs, locking balls and brass valves are also offered for corrosion resistance. ▮ Finally, optional sleeve-lock adds protection against accidental disconnection. There are also other types of  air compressor fittings  you can find in your range of products!

View Complete Details

Dual Pass Coupler

Dual Pass Coupler provide instant tubing connections. Widely applicable for hose connection of pneumatic devices and air piping at plants, etc. It has a 1/4″ port on the bottom for you to connect this item into your air line. Dual Pass Couplers are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.

View Complete Details

Multi Port Manifolds

  • Specification Fluid Admitted Air, Oil, Water (no freezing)
  • Working Pressure 0—1.0MPa, 0—150psi
  • Negative Pressure -100Kpa, -29.5 In Hg
  • Working Temperature 0—60°C, 32~140°F

Multi Port Manifolds allow easy changing of tools or hose connection and disconnection from your facility’s air supply line without shutting down or depressurizing the whole system. Easy way to boost the efficiency of compressed air system.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Centre Point Hydraulic
  • Dubai Investment Park 1, Dubai, United Arab Emirates, 171427, Dubai, United Arab Emirates