Shanghai Baudcom Communication Device Co.Ltd

shanghai, United Arab Emirates

bd-s2226i is a hi-performance workgroup-level or enterprise-scale ethernet switch, with 24 fast ethernet ports, plus 2 gigabit tx/sfp combo ports. Bd-s2226g can connect all (fast) ethernet devices so that your investment is protected. The hi-speed connection it provides among workgroups can boost the capability of server clusters, and solves the bottleneck caused by increasing users and limited bandwidth, making network resources more readily available to you. More importantly, all of the advantages are brought to you by baudcom at low costs and with easy maintenance.

applicationhi-performance inter-workgroup or enterprise-scale switchingfeaturesperformance24 gbps switch fabric, hardware routing, wire-speed l2 forwarding rate: 6.6 mpps80-km transfer by gigabit optical fiber, direct connection to wansecurity and reliabilityieee 802.1x and other methods for user authenticationpowerful acl supports l2-l7 data filteringsupport ipv6 aclselective qinq support.easy maintenanceautomatic recognition for straight-through or cross-over cablesstackable physically and through cluster technology. Central management with unified ipaddress saves ip addressesmanagement via console port, web, snmp, telnet, etc.support (baudcom) broad director, hp open view, cisco works 2000

traffic and broadcast controlauto-detection and restraining of broadcast storm, igmp snooping, effectively restrict broadcastflooding

full- and half- duplex traffic controlethernet port rate limiting with 64k step sizeip multicast and qos supportjumbo frame

supportl2+switching features, including vlan, trunk, mirroring, port isolation/flow control/speed limit, storm control, qos, acls etc.

support spanning tree stpandrstp.

jumbo frames support up to 9.6kkilobytes

support enhanced management through web, cli, telnet, snmp

support cable diagnosis

24 ports support poe. Compliant with bothieee 802.3af/at. Allow poe configuration for each poe port

the 26ports gigabit ethernetmanaged poe switch, provides a reliable infrastructure for your business network.itdelivers more intelligent features you need to improve the availability of your critical business applications, protects your sensitive information, and optimizes your network bandwidth to deliver information and applications more effectively. It provides the ideal combination of affordability and capabilities for entry level networking ofindustrial, small business or enterprise application which demands industrial, surveillance, ip phone, ip camera or wireless applications, thus helps you create a more efficientworkforce.

in short, the poe switchprovides security, performance, quality of services, central managedand othernetwork controlcapabilities. Optimized and customizeddesign and affordablepricing, it best fitforsmb or entry-level enterprise solution.itpassed therigorously testingto deliverexcellentperformance. As a managed switching solution, it alsoprovides the flexibility to manage and prioritizessuitable-bandwidth traffic such as voice.in addition, it hasadvance security and gives you tight control to safeguard the network from unauthorized users.

overview

bd-1000m-4tx-poeseries is a 5 port (1fx+4tp) 10/100/1000mpoe (pse) ethernet switch. The optical fiber port can greatly extend the transmission distance limitation of normal cat5e utp cable. All the four 10/100/1000mbps utp rj-45 ports supports full duplex 10/100/1000mconnectivity (half duplex only supported in 10/100mmode).

complied with ieee802.3at and ieee802.3af standard, the poe(pse) ethernet switch is a power sourcing equipment (pse) which combines data transfered over cable with 48v (typical) power supply, providing power to ieee802.3at /ieee802.3af powered device (pd) over cat5e utp cable (cable length up to 100meters / 330feets). All the four utp rj-45 ports are organized to be poe output port and each poe port can output up to 60watts (dc48v/1.2a) power into cat5e twisted-pair cable.

features

support one 1000base-fx fiber optical port and four 10/100/1000base-t utp rj-45 ports

4 ports ieee802.3at / ieee802.3af poe/pse output

(high power output up to 60watts per port)

support ieee 802.3z/ab 10/1001000base-

1000base-sx/lx/zx standards

supports ieee 802.3x flow control

supports 9216 bytes jumbo packet length

built-in 1mbits sram for packet buffer, with

4k-entry lookup table

description:

bd-s2108fs is gigabit switche and framed on the new-generation broadcom chip, are developed by baudcom for working in high-performance network groups and enterprises networks. The switch has 8 auto-adaptable 10/100/1000 base-tx electric rj-45 ports and 2 optional tx/sfp gigabit ports, and support 10/100/1000m connections, sonetworks can be flexibly configured.

features:

excellent performance

64gbps backboard bandwidth, uncongested design andfull wire-speed forwarding.

gigabit optical-fiber transmission with up to 80km distance and directly connecting the man backbone network.

high security and reliability

providing multiple user authentication modes such as 802.1x authentication.

powerful acl and hardware supporting l2 to l7 data filtration.

port-mac-ipbind.

special arp invasion detection to effectively stop arp cheat.

flexibleand various management modes

automatically identifying the straight-through cable and the intercrossed cable.

features

48x 10/100/1000m rj45 + 4x 10g sfp+

l2+ features provide better manageability, security, qos, and performance

support l2+ switching features, including vlan, trunk, mirroring, port isolation/flow control/speed limit, storm control, qos, acls etc.

support spanning tree stpandrstp.

jumbo frames support up to 9.6kkilobytes

support enhanced management through web, cli, telnet, snmp

support cable diagnosis

48 ports support poe. Compliant with bothieee 802.3af and 802.3at. Allow poe configuration for each poe port

this10-port gigabit managed industrial poe switch, provides a reliable infrastructure for your business network.itdelivers more intelligent features you need to improve the availability of your critical business applications, protects your sensitive information, and optimizes your network bandwidth to deliver information and applications more effectively. It provides the ideal combination of affordability and capabilities for entry level networking ofindustrial, small business or enterprise application which demands industrial, surveillance, ip phone, ip camera or wireless applications, thus helps you create a more efficientworkforce.

in short, itprovides security, performance, quality of services, central managedand othernetwork controlcapabilities. Optimized and customizeddesign and affordablepricing, it best fitforsmb or entry-level enterprise solution.itpassed therigorously testingto deliverexcellentperformance. As a managed switching solution, it alsoprovides the flexibility to manage and prioritizessuitable-bandwidth traffic such as voice.in addition, it hasadvance security and gives you tight control to safeguard the network from unauthorized users.

Product Overview

BD-100M-1F4TEthernet Switch is designed by Wintop. For Network high-definition monitor, network engineering etc. It provides high speed packet forwarding capacity and sufficient backboard bandwidth to ensure clear image and smooth transmission. Embedded static and surge protection circuit to improve product stability. Supports one-key VLAN configuration mode to achieve ports isolating and network storm inhibiting for protecting the information safety, preventing virus and online attack. It supports video channel mode, one-to-one correspondence channel mode can be configured under two same productsdownlink port.

Support long distance transmission mode, compulsory electric down link port data rate is 10Base-T, this increasing the transmission distance of down linkport. Under this state, the transmission distance of down link port is0-350m, which can completely meet the demands of network video monitoring systemand network engineering. The DIP type desktop Ethernet switch is oriented tothe terminal access layer, according to the port type and configuration quantity, we have model BD-100M-1F4T which has One Fast opticalinterface, Four Fastelectricalinterfaces ; every electric interface supports 10/100Mbpsself-adaptation and MDI/MDIX.

Product Features

One-key VLAN mode configuration, realize port isolation

One-key video channel mode configuration, downlink port one-to-one channel correspondence transmission mode

One-key long distance mode configuration, increase the transmissiondistance of the lower electrical interface

Input voltage range 100240V AC

features

can supply power to network surveillance cameras that without poe function

5x 10/100mbps auto-sensing rj45 ports, 4x 10/100mbps poe ports, 1x 155mbps sc fiber port

supports port auto-flip (auto mdi/ mdix)

external power supply

maximum poeportspower:120w(port1 toport4)

maximum powerof single poe port:30w

adopts store-and-forward architecture

ieee 802.3atpower on up to1-4ports

features with fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall

built-in 1u rack power supply series, easy to place it into standard mounting brackets

Key Features:

• Comply with IEEE 802.3, IEEE 802.3u standards
• Flow control: full-duplex using IEEE 802.3x standard, half-duplex technology with Backpressure
• 8/16/2410/100M adaptive RJ45 ports, supports port auto-flip (Auto MDI / MDIX)
• Support Port VLAN /MTU VLAN/IEEE802.1Q VLANfunction
• Provides port bandwidth control functions, the minimum size for the 128kbps
• Support for IEEE802.1p priority protocol mode, the secondary static port priority mode and ToS priority mode
• Support broadcast storm control
• Provide a fixed IP address settings
• Provide Web management
• Support for switching system software upgrades, save and restore configuration files

bd-s106fpi is high quality industrial poe switch which provide 4x 10/100m poe ports, 1x 10/100m optical ports, 2x 10/100m adaptive rj45 ports. Warranty time five years.

the fast ethernet industrial poe switch can be sued for connecting with devices like computer, switch, hub, server, etc, as well as powering network camera, voip, wireless ap and other poe supported devices. Optical fiber sfp interface extends network transmission distance limit from 100m to above 120km, it simply connects remote multiple motherboard servers, relays, hubs, terminals and multiple terminals.bd-s106fpiproduct components were rigorous screened, have superior performance in stability, environmental adaptability. Shells were made by aluminum extrusion, more lighter, stronger, better resistance ability to corrosion and electromagnetic interference, ensure stability and security of industrial ethernet switch, plus standard din-35 rail type installation method. Power input also chooses a suitable industry-standard types of power, to get more powerful suitability to environment.