Shanghai Baudcom Communication Device Co.Ltd

shanghai, United Arab Emirates

Theftth huawei hg8546m echolife gpon ont isan optical network terminal (ONT), is a high-end home gateway in Huawei FTTH solution. By using the GPONtechnology, ultra-broadband access is provided for home and SOHO users.The H8546M provides 1* POTS ports, 4* FE auto-adapting Ethernet ports, and 2* Wi-Fi port. The H8546M features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services. Therefore, the H8546M provides a perfect terminal solution and future oriented service supporting capabilities for FTTH deployment.

1.English version, latest firmware

2.SIP VoIP Protocol
3. 100% original and brand new from Huawei
4.1 year warranty

review:

bd-eoc-m is the integrated product consisting of one eoc master module with 1rf input and 1 com output, one gepon onu module with 1 pon port and 3 lan ports outputting data to eoc master module directly.

it is used as the fiber station node and the best choice for the existing coax cable networking for bi-directional service reconstruction without changing any original equipment, such as optical receiver and the coax distribution networking.

bd-eoc-ms rf input port connected to the optical receiver at the optical node for catv signal input .its data input port is gepon pon port , sc/pc connector , connecting directly to the fiber from the uplink gepon olt .and it has only one com port mixed with data and catv to the coax distribution networking.

in this way , it must be used with gepon olt system together , deployed in epon+eoc networking , easier for networking maintenance via centralized network management software ems on gepon olt to onu moduleand powerful and simple operated web management for eoc master to the eoc slave . Bd-eoc-m use waterproof metal casing so it can be used in complex environment.

the following are functional and feature of bd-eoc-m:

master module features:

physical layer bandwidth is 200mbps and mac layer bandwidth is 100mbps.

it can support hd video and other high bandwidth function

frequency band is 7.530mhz so has no influence on catv signal

using waterproof metal casing

overview:

bd-e1-eth is a single port g.703e1to ethernet converter (also calledethernet over e1 tdm converter, g703 to ethernet converter)that provides high-speed lan-to-wan connectivity. Plugging directly into the 10/100base-t port of a hub or lan switch, the bd-e1-eth provides e1 access at connection data rates of 2.048 mbps. The g703 e1 converter is an excellent choice for internet access as well as lan-to-lan services.

the e1 to ethernet converter can support mini desk type case and 19 rack mount type case. The 19 rack mount e1 converter can support double power (two ac or two dc or ac+dc), which strength the operation stability.

dimensions

mini type g703 e1 to ethernet converter: 210mm(w) 140mm (l) x 30mm(h)

19inch rackmount type ethernet e1 g703 converter:433 mm(l)138mm(w) 44 mm(h)

environment requirement
the temperature requirement is not very strict, the device can be working well under terrible environment.
working temperature: 0c 50c
relative humidity: 95%(without coagulation)
no erosive and impregnant gas, no rising dust, no strong magnetic field disturbing
power
adapting module power, voltage range can be wide, with strong ant-jamming function.
with good insulation, stable working status is available
power: -48v type, input voltage: -36v-72v
power: 220v type, input voltage: 165v265v
power consumption:

1introduction

internationally advanced soc digital signal processing technology and full digital video non-compression transmission technology are used in full digital video + optional optical transceiver, to real-time synchronize one-way high-definition sdi video and data/ switching value in single-core optical fiber and achieve lossless and high-quality transfer. Advanced high-stability components are used in optic circuit and core circuit of high-definition full digital video optical transmitter and receiver, and all optical/electric interfaces are in accordance with international standards, free of adjustment prior to mounting and applicable in various operating environments.

the sfp+ passive cable assemblies are high performance, cost effective i/o solutions for 10g ethernet and 10g fiber channel applications. Sfp+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed gigabit ethernet and fiber channel industry standard requirements for performance and reliability.

featuressupport for multi-gigabit data rates up to 10.5gbps1m3m5m reachdata rates backward compatible to 1gbpshot-pluggable sfp 20pin footprinti/o connector designed for high speed differential signal applicationsimproved pluggable form factor(ipf) compliant for enhanced emi/emc performancecompatible to sfp+ msatemperature range: 0 70 crohs compatible

description:

the g703e1 balun convertersupporting g.703e1 data rates to 2.048 mbps, the bic-c1-c receives 75 ohm signals and converts them to 120 ohm for transmission over a network or reception by a cpe. The signals output by the balun converter are scaled to match the pulse shape requirements specified by the ccitt g.703 standard. The balun converter can perform 120 ohm to 75 ohm signal conversion as well, giving the device a dual role.

features:

• data rates to 2.048 mbps
• dual coax 75 ohm to 120 ohm twisted pair rj45
• bi-directional signal conversion
• no ac power or batteries needed
• male bnc cable available, the cable length is 15cm
• ultra-miniature enclosure

• realizes long-distance monitoring of local device to the remote device based on self-copyright ic;
• provides two clock types: e1 master clock, e1 line clock;
• realize the automatically rate set of local device to remote device
• has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument;
• e1 supports 75 unbalanced and 120 balanced impedance at the same time;
• provides 30 voice channels, support calling indication
• voice port supports o port and s port, o port connects switch and s port connects users phone;
• support one ethernet port(option), realize 1*ethernet and 30channel phone over e1 multiplexer transmission;

BD-7101M EOC Master Module is based the Qualcomm AR7410 chipset solutionwith high anti jamming capability OFDM technology. The 7.5-65Mhz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87862Mhz can running on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.

BD-7101M is modularized product. Because of aluminum alloy die casting shaping it have good heat dissipation and shielding effect. It can integrate with our or the third-partys ONU, OR product to an multifunction product.

HomePlug AV solution, based the Qualcomm AR7410 chipset

7.5-65Mhz frequency for EOC signals., no influence on CATV Service

PHY Layer speed600Mbps, MAC Layer throughput up to 320Mpbs

Support bi-direction data encryption

Support broadcast storm limitation

Support data packet statistics

Support auto-update and auto-configuration

Support WEBCLISNMP based network management

Support On-line upgrading

Aluminum alloy die casting shaping, good heat dissipation

bd-eoc-s2/s4 is the ethernet over coax (eoc) slave based on homeplug av solution for ethernet access on coax. It work together with eoc master which is based on homeplug av solution as well to construct a 2 layer ethernet data transmission channel on catv coax cable, provide the ethernet access service based on coax cable.

bd-eoc-s2/s4 use int6400 chipset, and ofdm module technique of highly interference resistant, take up the low frequency 7.5mhz-30mhz to transfer data, the physical layer speed is 200mbps, while the max mac layer throughout is 100mbps.

bd-eoc-s2/s4 for data access could use current coax cable, easy and fast to construct without any effect of existing catv on the cable.in the actual network constructive application, one master could connect 253 slaves maximum, and the network structure could be star or tree.bd-eoc-s2 is 2 ethernet port slave, bd-eoc-s4 is 4 ethernet ports slave.

Overview:

The coax to RJ45 16E1 balun converterallow 75 Ohm coax to communicate with 120 Ohm twisted pair equipment. The 16E1 balun panel specifically address the ONP requirement that PTTs offer 120 Ohm twisted pair terminations to their customers. Some telecommunication equipments output only on 75 Ohm coax, or have customers whose CPE has only 75 Ohm coax connections. The 75 ohm to 120 ohm balun panel present a ready solution to this termination mismatch by allowing a bi-directional conversion of coax(75 Ohm )to a twisted pair (120 Ohm ), supporting data rates to E1(2.048Mbps). The signals output by them are scaled to match the pulse shape requirements specified by the CCITT G.703 standard.

• Data Rates to 2.048 Mbps
• 75 Ohm to 120 Ohm Twisted Pair RJ45;
• Bi-Directional Signal Conversion
• 2U high enclosed chasiss
• mounts in a standard 19 inch(48.3cm) rack
• No AC Power or Batteries Needed
• 16 Female BNC connector Available
• BNC connector and RJ45 connector are front.

functionsthevoice(fxs/fxo)phone over fiber multiplexerispoint to point fiber transmitting equipment, which realizes 1port 10/100m ethernet and 4 channel analog voice phone over fiber transmission. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.

the gpon poe ont is type poe (pse) product, with 4 fixed 10/100/1000mbps auto-adapted poe ports. it supports ieee802.3af 15.4w and ieee802.3at 30w poe standards.it can auto discovery the power receiving devices which support ieee802.3af/at standard and supply power to it.

to the connected devices which not support poe, it will auto stop supplying power. The gpon poe onu supports to work with ip camera, ip phone, wireless ap and other network devices, and supply power to these devices. The poe ont workswith central device olt to implement integrated management, long-distance fault location and decrease maintenance workload. The gpon poe ont is metal casing design and suitable for fttb/ftth.

it is mainly applied to security surveillance, smart city, tunnel monitoring, coal mine network etc. The ont can be installed on desk or wall.

feature

• apply to itu-t g.984/g.988
• support auto discovery and auto register (real-time operation)
• support dba and multi types sla
• support ieee802.1d rstp
• support igmp snooping v2 multi-broadcast function
• support emi and esd identification
• support vlan
• support user end auto time synchronization based at sntp
• support powerful oam and remote management
• support port speed limit, loop detection and port vlan
• support state detection and fault location
• support power failure alarm
• each poe port supports to auto discovery the standard power receiving devices
• support ieee802.3af 15.4w and ieee802.3at 30w poe standards

Overview:
Time Slot Extraction and Insertion system consists of node equipment and central convergence server, and node equipment can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the node equipment can construct chain network by cascade connection, and the central server can collect serial port data or Ethernet data of E1 time-slots, and upload it via IP mode. It can be extensively used in the power environment monitoring and control, power monitoring and control, mobile basic station monitoring and control, Signaling Number 7 monitoring and control, mobile charging network and other similar data gathering system and remote interconnected system.
Product Features:
It can support star and chain networking and link-fault-pass through function;
E1 port accords with ITU-T G.703, G.704 and G.823, and the resistance of 75 unbalanced and 120 balanced can be selected.
The serial port of node equipment can be selected from three working modes: RS232/RS422/RS485, and can adapt for a rate lower than 19.2kbps. Ethernet port can support 10M/100M, full-duplex/semi-duplex and adaptive modes, and accords with IEEE802.3 serial protocol;
The node equipment can transmit E1 time-slot of serial port data or Ethernet data by DIP switch setting;

2 features

• realizes long-distance monitoring of local device to the remote device ;
• provides4 channels ethernet ports, 10m/100m, full half duplex self adapt, support vlan
• the ethernet interface supports auto-mdix( cross over and straight through self adapt)
• 4 ethernet interfaces support channel separate function, can set vlan based on tag
• provides two clock types: e1 master clock, e1 line clock;
• provides 3 kinds of loop-return function, namely e1 self-looping at local end, ethernet self-looping at local end, ordered to self-loop at remote end;
• realize the automatically rate set of local device to remote device
• has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument;
• ethernet supports rate of n*64k (n=1-32), which can be regulated from 64k to 1098k;
• supports 75 unbalanced and 120 balanced impedance at the same time;
• provide ethernet auto reset function, run more stably
• various ethernet data indicate functions, which indicate data transmission status timely;
• provides 1-8 voice channels, support calling indication;
• voice connector fxo (fxs), fxo connect to pbx and fxs connect to phone;
• support 4 wire e&m
• rs232 channel can transfer asynchronous serial data with self-adaptable baud rate of 300 to 115.200;

Description:

BIC-C16 G.703 rack mount 16E1 balun panelsolve the mismatch between UTP and coaxial cable.BIC-IC16 can achieve a maximum of 16 channel conversion.Operating in compliance with the CCITT G.703 specification, the BD-IC16 occupies only 1U of vertical rack space in a 19 (48.3 cm) rack-allowing for efficient multiport matching.

Features:

• Connects 75 ohm dual coax to 120 ohm twisted pair (or visa versa)
• Bi-directional signal conversion according to CCITT G.703
• Data rates up to2.048 Mbps
• Low profile design
• Mounts in standard 19 (48.3 cm) Rack
• No AC power or batteries required
• Female coax BNC connectors

Features:
Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); when error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
Has 2 loop back functions: E1 local loop, E1 remote loop.
Supports Dynamic Ethernet MAC address (4096) with local address filter function.
E1 interface compatible with ITU-T G.703, G.704, and G.823. not supporting signal timeslot.
E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut

Description:
The 24E1 G.703 impedance balunpanelsolve the mismatch between UTP and coaxial cable. The baluns can be used for internal network connectivity T1/E1/CPE network transmission equipment and other applications.
The 24ports balun matches 24 sets of dual 75ohm coax connections to 120ohm RJ45 connections. This feature allows network & datacom equipment manufacturers who are selling equipment with only 120ohm interface to offer their equipment to G.703 countries using 75ohm connections.
The balun matches not only signal impedance , but also the pulse shapes of the signals according ITU-T G.703 standard. The 24port balun (BIC-C24) mounts in a standard 19 inch(48.3cm) rack, occupies only 1U of rack.
Features:
Data Rates to 2.048 Mbps
75 Ohm Dual Coax BNC to 120 Ohm Twisted Pair RJ45
Bi-Directional Signal Conversion
1U high enclosed chasiss
mounts in a standard 19 inch(48.3cm) rack
No AC Power or Batteries Needed
24 Female Coax BNC Connectors Available

1.Description

BIC-C16-M37 is 16 port BNC to M37 interface converter .

Standard 19/9.5 inches rack, little volume, light weight, steady capacity and convenient installation.Assemble DB37/MDR68 cable (optional).

2. Features:

• rack mountpanel
• Bi-Directional Signal Conversion
• No AC Power or Batteries Needed
• DB37 female connector
• Female Coax BNC Connectors
• Ultra-Miniature Enclosure
• Assemble DB37/MDR68 cable (optional).

DB37/MDR68 cable

description:

the coax to rj4524 e1balun panel provides 75ohm coax (1.6/5.6 connector) to 120ohm twisted pair (rj45 connector) conversion. the 24ports balun panel matches 24sets of dual 75ohm (female 1.6/5.6 connector) to 120ohm (rj45 connector) converter. This feature allows network & datacom equipment manufacturers who are selling equipment for use incoswith only 120ohm telco interface to offer their equipment to g.703 countries using 75ohm connections.

the 24e1 g.703 impedance matching balun panel solve the mismatch between utp and coaxial cable. The balun can be used for internal network connectivity t1/e1/cpe network transmission equipment and other applications.

the balun matches not only signal impedance, but also the pulse shapes of the signals according itu-t g.703 standard. The 24port balun panel mounts in a standard 19 inch(48.3cm) rack, occupies only 1u of rack.

features:

• data rates to 2.048 mbps
• 75 ohm (1.6/5.6 connector) to 120 ohm twisted pair (rj45)
• bi-directional signal conversion
• 1u high enclosed chasiss
• mounts in a standard 19 inch(48.3cm) rack
• no ac power or batteries needed
• 24 female 1.6/5.6 connector available

BD-OLT-8000U is 1U high 19 inch rack mount product.The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for Triple-Play, CPN, IP Camera, Enterprise LAN and IOT applications. It is a highperformance products.

BD-OLT-8000U provides 1 USB interface, 4GE(copper) and 4GE optical interface, 4*10Gb uplink interface, and 8 EPON ports for downstream. It can support 512 ONUs under 1:64 splitter ratio.

BD-EOC-S4-W is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.

The built-in wifi module based on the single chip AR9331 which integrates an 802.11n 11 MAC/BB/ radio with internal PA and LNA. It supports 802.11n operations up to 72 Mbps for 20 MHz and 150 Mbps for 40 MHz channel respectively, and IEEE 802.11b/g data rates.

BD-EOC-S4-W is slave with 4 Ethernet ports with built-in Wifi.

• Low-frequency modulated EOC slave is adopted INT7400 chipset, HomePlug AV solution
• Work at low frequency between 7.5MHz and 65MHz, without affecting the existing CATV
• Physical layer speed: 500Mbps; Max MAC layer throughout is 300Mbps
• Support 4 Ethernet ports with 10/100Mbps auto-negotiation function
• Support VLAN configuration based on slave unit or slaves Ethernet ports
• Support broadcast storm control
• Support WEB, CLI and SNMP management

description:

baudcoms bdtr-gb-pxrc copper small form pluggable (sfp)transceivers is high performance, cost effective module compliant with the gigabit ethernet and 1000- base-t standards as specified in ieee 802. 3-2002 and ieee 802.3ab, which supp- orting 1000mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 mbps full duplex data-links with 5-level pulse amplitude modulation (pam) signals. All four pairs in the cable are used with symbol rate at 250mbps on each pair. The module provides standard serial id information compliant with sfp msa, which can be accessed with address of a0h via the 2wire serial cmos eeprom protocol. The physical ic can also be accessed via 2wire serial bus at address a0h.

features:

• up to 1.25gbps bi-direction data links
• 100m transmission over unshielded twistedpair (utp) category 5 cable
• support intelligent auto-negotiation 1000base-t operation in host systems with
• sgmii interface
• hot-pluggable capability
• sfp/gbic form with compact rj-45 connector
• very low emi and excellent esd protection
• +3.3/5v single power supply

Features:

1.Integrated design, smart and rugged.

2.Small and light, easy to carry.

3.1625nm online detection module with filter is available as a option for a online FTTx/PON detection.

4.Multi-measuring modes, simple to use, finish measurement by just one button.

5.Realtime measuring function, convenient to monitor the splicing process.

6.Internal large power visual laser source for accurate positioning the closer fault point.

7.Internal stable laser source.

8.Optical power meter function is offered as a option.

9.Warnning function could prevent module of OTDR damaged by optical signal.

10.Integrated with Screenshot function.

11.PC Remote access and control function is available via RJ45 interface.

12.Support multi-language display and input, friendly interface, visual keyboard capable.

13.Integrated with large internal memory.

14.Provide data simulation software to process, generate and print report.

15.Battery indicator function.

16.IP65 protection level, outdoor enhanced.

The Serial server can implement the conversion between 1channel RS232/RS485/RS422 serial ports and 10/100M Ethernet ports, and two models are available: complete machine and embedded module. It can be extensively used for data collection of supervision and control system for power in machine room and base station of operators, automatic supervision and control for plant, automation of medical treatment and medicine, networking control of electromechanicalinstrument, networking control of attendance checking, networking control of security/access control and other occasions.

the serial server can implement the conversion between 1channel rs232/rs485/rs422 serial ports and 10/100m ethernet ports, and two models are available: complete machine and embedded module. It can be extensively used for data collection of supervision and control system for power in machine room and base station of operators, automatic supervision and control for plant, automation of medical treatment and medicine, networking control of electromechanicalinstrument, networking control of attendance checking, networking control of security/access control and other occasions.

general description:

the live fiber identifier allows you to detect traffic and measure signals anywhere onsinglemode fibers without having to disconnect them . It also lets you check for signal presence before rerouting or maintenance , perform continuity tests and verify cable labeling. Based on non-destructive macrobending technology, the fiber identifier doesnt disrupt traffic, damage or overstress the fiber, enabling efficient, accurate and reliable data acquisition

features:

indicate the signal directions in fiber;

indicate the signal presence or absence(live or dark fiber);

detect tones 270hz, 1khz and 2khz to verify the modulated signal type;

suitable for 0.25, 0.9, 2.0, 3.0mm fiber, and no need to replace the clamp block,

more convenient than others

build in vfl 1mw or 10mw optional

battery low indication;

powered by 2 units of 1.5v aa batteries;

one-year warranty and three-year recommended calibration interval

BD-2EOC-OR-ONU is an all-in-one EOC Master with EOC master module, ONU module and OR module.

We can use one BD-2EOC-OR-ONU to instead of three type products, HFC optical node, EPON ONU and EOC mater. It can reduce the number of active node in the system, decreasing failure rate and saving a space. It is the best choice of CATV, Internet and VOD for the operator.

The EOC Master Module in the BD-2EOC-OR-ONU is based the Qualcomm AR7410 chipset solutionwith high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.

The OR module in the BD-2EOC-OR-ONU can provide an HFC optical input and one RF output. The CATV signal will convert from optical to RF signal here. The OR module is a high quality optical receiver product. It received the optical signal from the TX of HFC network, and the signal processed by the PIN, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 108dBuv.

The ONU module in the BD-2EOC-OR-ONU designed with one EPON port, two standard 10/100/1000 Base-TX Ethernet ports. It provides the key functionality of 802.3ah EPON ONU. By using the EPON technology, the ONU module provides a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.

Video

Number of channels : 1 channel with loopout

Input/out put Connector : BNC 75

Input/output voltage: 1.0 Volt p-p

Video Bits Rate: Max 3.2Gb/s

Video SDI Standards:270Mbps(SD-SDI)

1.485Gbps/M(HD-SDI)

SMPTE425M3Gb/s Mapping(3G-SDI)

SMPTE424M 3Gb/s serial interface(3G-SDI)

Fiber Optic

Number of Optical port : 1 SFP

Connector : Simplex LC

Transmission Distance:Single-mode 20Km

Single-mode:1310/1550nm, 1490nm(Option)

Connectors

Video : BNC 75

Fiber Optical : Simplex LC

Stand-alone power: DC JACK

Rack power: AC line cord

description

1ch 3g-sdi with loopout fiber video converter, 20km, tx/rx.

system design

fiber optic video transmitter & receiver

sdi series can transmission 1-channel

3g-sdivideo over 1 single core fiber.

single-mode

3g-sdiunit is designed to support lc /pc optical connector

we will offer free patch cord + adaptor for your request for sc/pc or st/pc or fc/pc optical connector.

the transmission distance range according to the optical budget.

manufacturers default standard is single mode 20km .

Product Overview

BD-MUX04-LMXE.V8 is a carrier-class, cost-effective, compact, high-capacity SDH &IP Network integrated transmission platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and increasing Ethernet data traffic for service providers. Multiple services can be transported over SDH network and IP metro network easily via BD-MUX04-LMXE.V8. Both SDH Cross-connection Matrix and Packet Switching Core are supported.

BD-MUX04-LMXE.V8 is a card based compact SDH &IP Network integrated equipment, designed mainly as a gateway node between the core SDH/IP network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 3U high 19 wide chassis of the BD-MUX04-LMXE has 19 slots, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for TDM cross-connection cards, 2 slots for Packet switching cards, and 12 slots for universal service cards.

product function:baudcom cwdm device is a sort of multi-service processing and transmission device that designed especially for point-to-point applications. It provides interfaces such as atm, gigabit ethernet, stm-1/4/16 and oc-3/12/48 on the basis of a transparent transmission platform constructed by virtual fiber-optic capability enhancing devices, which can fulfill upstream/downstream transmission services at various speed including 100/155/200/622/1000/1250/2500m, and entirely increase the performance/price ratio of the optical network platform.

the device adopts a box structure of 19 rack, of height 1u and depth 180 mm. The product can be mounted on the standard 19 rack, with the front panel providing optical interfaces for channels and lines, working and alarm indicators, 10/100m auto-negotiating network management interfaces, rs232 network management commissioning interface etc., and the rear panel providing ac 220v / dc -48v power supply socket interfaces and power switches etc.

features:

• protocol transparency: seamless connection with ethernet, sdh network and fiber channel, including interfaces such as atm, gigabit ethernet, stm-1/4/16 and oc-3/12/48;
• transparency of bit rate: auto-negotiating receiving and transmitting speed 45mbps2.5gbps ;
• transmission distances of diversified specifications: 30km, 50km or 80km ;
• compact structure of 19 rack, occupying less space and consuming less power; convenient installation and operation ;
• optional network management methods, providing management interfaces such as snmp and telnet ;

The 16ports FTTX GPON OLT completely meet relative standard of ITU G.984.x and FSAN, which is 1U rack-mounted device with1 USB interface, 4 uplink GE ports, 4 uplink optical ports, 2 10-gigabit uplink ports and 16 GPON ports, each GPON port supports the splitting ratio of 1:128 and provides downstream bandwidth of 2.5Gbps and upstream bandwidth of 1.25Gbps, the GPON OLT can support 2048 GPON terminals ONT accessing.This product meets the requirements in device performance and size of compact server room as the product has high performance and compact size, is convenient and flexible to use, and is easy to deploy as well. Moreover, the product meets the requirements of promoting network performance, improving reliability and reducing power consumption in the perspective of access network and enterprise network and is applicable to three-in-one broadcast television network, FTTP (Fiber to the premise), video monitoring network, enterprise LAN (Local Area Network), internet of things and other network applications with a very high price/performance ratio.

Meet ITU-T G.984/G.988 standard and relative GPON standards of Chinese Communication Industry

Support OMCI remote management for ONT/ONU, compatible with ITU-T G.984.4/G.988 OMCI Protocol

1U height 16PON OLT product in compact design of Pizza-Box

Layer 2 Switching Function

OLT equips with very powerful layer 2 Full Wire Speed Switching and completely supports layer 2 protocol.OLT supports varieties of layer 2 functions like TRUNK, VLAN, rate limit, port isolate, queue technology, flow control technology, ACL and so on, which provides technical guarantee for the development of multi-service integrated.

According to the Next Generation Broadcasting (NGB) planning and PON standards, 1550nm is defined as the transmission wavelength for HFC downstream.

The high cost of 1550nm external modulated transmitter and dispersion effects of 1550nm directly modulated make network transformation difficult. Thus we create the 1550nm directly modulated optical transmitter with electronically controlled dispersion compensation.

It supports up to 1.2GHz band and DOCSIS 3.1 system. With two RF inputs and high isolation, it enables the signal transmission of QAM and IPQAM smoothly. Support a transmission distance of 50KM with electronically controlled dispersion compensation. Built-in CWDM is optional for multi-wavelength networking.

Performance Characteristics

• 1.2GHZ band, support DOCSIS 3.1 system.
• The AGC and MGC gain control modes are optional.

• Two inputs with 50dB isolation for high quality RF insertion.
• Dual power supply; hot backup; a variety of power supply options are available, optional AC220V and DC48V.
• Laser output power, bias current and cooling current are detected in real time.
• Optional CWDM for optical signal insertion.
• Electronically controlled dispersion compensation can support a transmission distance of 50KM.
• Low-cost solution is comparable to the performance of external modulated transmitter.
• ITU standard wavelength is optional.

Features:

1.Integrateddesign, smartandrugged.

2.Smallandlight, easytocarry.

3.1625nmonlinedetectionmodulewithfilterisavailableasaoptionforaonlineFTTx/PONdetection.

4.Multi-measuringmodes, simpletouse, finishmeasurementbyjustonebutton.

5.Realtimemeasuringfunction, convenienttomonitorthesplicingprocess.

6.Internallargepowervisuallasersourceforaccuratepositioningthecloserfaultpoint.

Huaweis MA5600T series OLT is the worlds first Terabit fiber access system. It includes the large-capacity MA5600T and the small-capacity MA5608T. The hardware and software of these two models are fully compatible with each other to reduce the costs of spare parts and O&M costs. The MA5600T provides 14 service slots and MA5608T provides 2 service slots.

• Deployed at the remote end, including the base stations (BSs) and outdoor environments
• 2 U high, and supports a maximum of two service boards
• Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios
• Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenari

Description:BAUDCOM 5000 series Optical Time Domain Reflectometer (OTDR) is an intelligent meter of a new generation for the detection of fiber communications systems. With the popularization of optical network construction in cities and countrysides, the measurement of optical network becomes short and disperse; The 5000 series is specially designed for that kind of application. Its economic, having outstanding performance.The ODTR is manufactured with patience and carefulness, following the national standards to combine the rich experience and modern technology, subject to stringent mechanical, electronic and optical testing and quality assurance; in the other way, the new design makes ODTR more smart and compact and multi-purpose.Whenver you want to detect link layer in the construction and installation of optical network or proceed efficient maintenance and trouble shooting, the ODTR can be your best assistant.

Features:1. Integrated design, smart and rugged.2. Small and light, easy to carry.3. 1625nm online detection module with filter is available as a option for a online FTTx/PON detection.4. Multi-measuring modes, simple to use, finish measurement by just one button.5. Realtime measuring function, convenient to monitor the splicing process.6. Internal large power visual laser source for accurate positioning the closer fault point.7. Internal stable laser source.8. Optical power meter function is offered as a option.9. Warnning function could prevent module of OTDR damaged by optical signal.10. Integrated with Screenshot function.11. PC Remote access and control function is available via RJ45 interface.12. Support multi-language display and input, friendly interface, visual keyboard capable.13. Integrated with large internal memory.14. Provide data simulation software to process, generate and print report.15. Battery indicator function.16. Long working hours for outdoor operation.

• It takes the PTMP (point to multipoint)network topology, effectively collects and converges scattered Ethernet services, and provides the 10/100/1000M Ethernet standard RJ45 interface, smoothly interconnects with existing networks.
• The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS.
• Supports IGMP multicast, effective use of broadband;
• Supports multicast VLAN;
• Full management through an Operation Administration Maintenance (OAM) protocol based on IEEE802.3ah, including configuration, alarm, performance monitoring, fault isolation and security management, etc. It supports remote management through OLT and local console management as well.
• Supports FEC and DBA;

• Supports IEEE802.1Q VLAN protocol;

• Supports IEEE 802.1p protocol;

• Supports remote loopback and network status diagnosis

• Supports flow statistics

• Supports storm control;
• Support NAT;
• Support PPPOE;
• Support DHCP Server Client;
• Support Route;

features & benefits

• convert 75 ohm coax to 120 ohm twisted pairresolves impedance mis-match between twisted pair equipment and coax cabling
• ultra-miniature sizeprovides maximum density when installed into a 19-inch (48.3cm) panel
• industry standard coax connectorsa host of coax connectors including bnc, 1.6/5.6, 1.0/2.3 and type 43 are available
• low insertion lossfully meets itu-t (ctr-12) g.703 standards
• no power requiredoperation is transparent to data, no ac/dc power is required

bd-ptn-1000 series are ptn devices (packet transport network) designed and produced by baudcom, providing strong capacity, high port-density, and kinds of ports with very compact chassis.

with 1u high and 4 service slots, 10ge/ge/fe/e1 ports are supported. The bd-ptn-1000 series focus on edge of providers ip/mpls transport network.

they are very suitable for delivering l2vpn based on mpls-tp, and ces services for customers with end-to-end guaranteed availability, reliability and qos to the key client. They are designed to help providers overcome challenges over resources, costs and services at the metro access layer, to bring values to both providers and their customers. Baudcom self-owned unified nms platform - ezview is offered for bd-ptn-1000 series oam.

The BD-VDSL-V75 is 5-port FE VDSL router with wifi and USB.

The VDSL Router is a versatile, high-speed remote router for home and the small office.

product function:baudcom cwdm device is a sort of multi-service processing and transmission device that designed especially for point-to-point applications. It provides interfaces such as atm, gigabit ethernet, stm-1/4/16 and oc-3/12/48 on the basis of a transparent transmission platform constructed by virtual fiber-optic capability enhancing devices, which can fulfill upstream/downstream transmission services at various speed including 100/155/200/622/1000/1250/2500m, and entirely increase the performance/price ratio of the optical network platform.

the device adopts a box structure of 19 rack, of height 1u and depth 180 mm. The product can be mounted on the standard 19 rack, with the front panel providing optical interfaces for channels and lines, working and alarm indicators, 10/100m auto-negotiating network management interfaces, rs232 network management commissioning interface etc., and the rear panel providing ac 220v / dc -48v power supply socket interfaces and power switches etc.

description:

theg.703 balun adapter(also calledimpedance converter) solve the mismatch between utp and coaxial cable. The g703 balun realize 75ohm(bnc) to 120ohm(rj45) converter.the baluns can be used for internal network connectivity t1/e1/cpe network transmission equipment and other applications.

supporting e1 data rates to 2.048 mbps, the bic-c1 receives 75 ohm signals and converts them to 120 ohm for transmission over a network or reception by a cpe. The signals output by the bic-c1 are scaled to match the pulse shape requirements specified by the ccitt g.703 standard. The bic-c1 can perform 120 ohm to 75 ohm signal conversion as well, giving the device a dual role.

features:

• data rates to 2.048 mbps
• 75 ohm dual coax to 120 ohm twisted pair
• bi-directional signal conversion
• no ac power or batteries needed
• male or female coax bnc connectors available
• ultra-miniature enclosure

overview

the chassis have 12slots for the voice phone cards. Every card can realize 30pots (fxo/fxs), 14channel g.703 e1 and 14 channel100methernet over fiber transmission, every card can work with the remote standalone30voice fiber multiplexerby point to point application. The voice phone chassis total capacity is 360 pots (fxo/fxs).the chassis also can support snmp management.

features

212slots for voice phone card, 2slots for power, 1slot for management card (option)

2the voice phone card support 30channel phone, 4*100methernet (option), 4 channel e1 (option);

2voice port support pots( fxo/ fxs), also can offer 2/4 wire e&m for option;

2ethernet port 10/100m, full/half duplex auto-adaptable and supports vlan;

2ethernet port supports auto-mdix (twisted cable and straight cable auto-adaptable);

2maximum capacity is 360 channel voice connection, supports calling indication;

2configuration: point to point appliation;

2voice port supports o port and s port, o port connects switch and s port connects users phone;

optical interface supports sc/fc interface and supports single fiber interface