Our Products
Our product range contains a wide range of Dolphin 50 Duct Tape, Dolphin Single Sided EVA Foam Tape, Dolphin 50 Micron PE Protection Tape, Dolphin AMI-200 Aluminum Foil Tape and Dolphin 35 Duct Tape
AMI 50 Mesh Duct Tape is a polyethylene film laminated over a cloth/scrim substrate coated with rubber based adhesive of strong peel adhesion and it is also water proof.
Application- HVAC application- Sealing ventilation ducting- Moisture Proofing- Water proof packing- Heavy duty packing- Bundling, Patching, Sealing & Wrapping
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources.Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
DOLPHIN SINGLE SIDED EVA FOAM TAPE is Ethyl Vinyl acetate foam coated with Rubber Resin pressure sensitive adhesive of high shear and excellent adhesion and self-wound on release liner.
ApplicationTapes to be stored in a cool dry area away from direct sunlight and other heat sources. Tapes should be used with in twelve (12) months from shipment. For best performance apply the tape on clean, dry, dust & oil free surfaces between 25 to 45 degree celsius.
Dolphin 45 PE Protection Tape is a polyethylene protection Tape having low peel acrylic emulsion, pressure sensitive adhesive. System to provide temporary protection of surface during Mechanical process, storage and transportation. It does not leave any adhere residue after peeling off from the applied surface
ApplicationSmooth Aluminum surfaces, Polished SS surfaces, PVC (Doors & Frames) Glass & Mirror finish surface.
Application instruction-
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 200 Aluminum Foil Tape is a soft aluminum foil coated with rubber resin pressure sensitive adhesive of high shear and excellent adhesion and self-wound on release liner.
Application- General purpose holding, patching, sealing.- Reflect heat & light away from sensitive area.- Coupling and sealing pipe joints in ventilation, air condition and refrigeration systems.
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources.Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 35 Mesh Duct Tape is a polyethylene film laminated over a cloth/scrim substrate coated with rubber based adhesive of strong peel adhesion and it is also water proof.
Application- HVAC application- Sealing ventilation ducting- Moisture Proofing- Water proof packing- Heavy duty packing- Bundling, Patching, Sealing & Wrapping
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources.Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
DOLPHIN PVC PIPE WRAPPING TAPE is Polyvinylchloride film coated with Synthetic Rubber pressure sensitive adhesive of Excellent Peel strength, anti-corrosive & moisture resistant
ApplicationAir condition duct wrapping , Pipeline Protection , Moisture Proofing
Application instructionWidth and length are available onrequest.
Storage and Shelf lifeTapes should be stored in a cool, dryarea away from direct sunlight andother heat sources. Tapes can be usedbefore six (6) months when stored at25C with 50% Relative Humidity.
Dolphin Printed PE Protection Tape is a polyethylene protection Tape having low peel acrylic emulsion, pressure sensitive adhesive System to provide temporary protection of surface during Mechanical process, storage and transportation. It does not leave any adhere residue after peeling off from the applied surface.
ApplicationAluminum panel/ profile, Construction area, Plastic windows & door, Glossy surface.
Application instruction---
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
Dolphin 55 PE Protection Tape is a polyethylene protection Tape having low peel acrylic emulsion, pressure sensitive adhesive. System to provide temporary protection of surface during Mechanical process, storage and transportation. It does not leave any adhere residue after peeling off from the applied surface.
ApplicationAluminum panel / profile, Construction area, Plastic windows & Door , Glossy surface.
Application instruction--
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 50 Mic BOPP Packaging Tape comprises of a Biaxially Oriented Poly Propylene (BOPP) film coated with acrylic emulsion pressure sensitive adhesive of high tensile strength, excellent adhesion and flexibility.
Application- Splicing and sealing- Mounting- General purpose packaging- Bundling & holding lamination
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI HT 80 Masking Tape is a yellow colored crepe paper coated with rubber based adhesives of high shear strength and excellent adhesion
Application- General purpose packing- Bundling, Labeling, Paint masking- For paint masking at medium temperature
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources.Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
Dolphin Reinforce Aluminium Tape is a pressure sensitive rubber based adhesive with foil, scrim Kraft reinforced and self- wound in release liner.
ApplicationClosure system for fiber glass & mineral wool insulation system that are faced with foil, seal seams and joints on aluminum faced fiber glass duct board.
Application instructionSLITT ROLLS & JUMBOROLLS
Width and length are available on request.
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 60 Masking Tape is a natural colored crepe paper coated with rubber based adhesives of high shear strength and excellent adhesion.
Application- General purpose packing- Bundling, Labeling, Paint masking- For paint masking at medium temperature
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 40 Mic BOPP Packaging Tape comprises of a Biaxially Oriented Poly Propylene (BOPP) film coated with acrylic emulsion pressure sensitive adhesive of high tensile strength, excellent adhesion and flexibility.
Application- Splicing and sealing- Mounting- General purpose packaging- Bundling & holding lamination
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 43 Mic BOPP Packaging Tape comprises of a Biaxially Oriented Poly Propylene (BOPP) film coated with acrylic emulsion pressure sensitive adhesive of high tensile strength, excellent adhesion and flexibility.
Application- Splicing and sealing- Mounting- General purpose packaging- Bundling & holding lamination
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 45 Mic BOPP Packaging Tape comprises of a Biaxially Oriented Poly Propylene (BOPP) film coated with acrylic emulsion pressure sensitive adhesive of high tensile strength, excellent adhesion and flexibility.
Application- Splicing and sealing- Mounting- General purpose packaging- Bundling & holding lamination
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity.
AMI 48 Mic BOPP Packaging Tape comprises of a Biaxially Oriented Poly Propylene (BOPP) film coated with acrylic emulsion pressure sensitive adhesive of high tensile strength, excellent adhesion and flexibility.
Application- Splicing and sealing- Mounting- General purpose packaging- Bundling & holding lamination
Application instructionBefore tape application, the surface must be free from Moisture, Oil, Dust and Solvents.For the best performance, apply the tapes at room temperature (between 15C and 45C).
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes should be used within twelve (12) months when stored at 25C with 50% Relative Humidity
Dolphin PE 65 Protection Tape is a polyethylene protection Tape having low peel acrylic emulsion, pressure sensitive adhesive System to provide temporary protection of surface during Mechanical process, storage and transportation. It does not leave any adhere residue after peeling off from the applied surface.
ApplicationAluminum panel/ profile. Construction area. Plastic windows & door. Glossy surface.
Application instruction-
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
DOLPHIN WARNING TAPE is widely used in the field of law enforcement, construction, safety, painting, work areas, crime scenes and any potentially dangerous areas.
ApplicationWidth and length are available on request.
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
Dolphin ALU GLASS TAPE is a pressure sensitive Rubber resin adhesive with Foil glass fabric and self-wound in release liner.
ApplicationClosure System for Fiber Glass & Mineral Wool Insulation System that is faced with foil , Seal seams and Joints on aluminum faced fiber glass duct board.
Application instructionCOLORS
Dolphin Alu Glass Tape is available in silver metallic color only.
SLITT ROLLS & JUMBO ROLLS
Width and length are available on request.
Storage and Shelf lifeTapes should be stored in a cool, dry area away from direct sunlight and other heat sources. Tapes can be used before twelve (12) months when stored at 25C with 50% Relative Humidity.
Test Method Properties Unit Specification
Lab Test Color Visually Black / Grey
Lab test Backing XLPE FOAM
ASTM D 3575W Density Kg/m 30 ± 5
ASTM D 3652 Total Thickness MM 3 ± 0.5
ASTM D 3330 Peel strength N/25 mm ≥7
ASTM D 3759 Tensile Strength N/25 mm ≥25
ASTM D 3654 Shear strength hrs ≥ 15