Al Muqarram Insulation Material Industry Llc

Sharjha, United Arab Emirates

AMI 150 GP SILICONE SEALANT is a one-part silicone sealant which cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surfaces, metals, most plastics, tiles, wood, concrete and other building materials.

AMI 150 GP SILICONE SEALANT has excellent physical properties designed to give outstanding durability and performance also containing anti-fungus and antibacterial reagent.

- General sealing applications- Bonding in shower cabinets during production- Sealing around bathroom fixtures- Waterproofing sink- Filling joints between bathtubs and tiles- Filling joints between tiles, tubs and shower cabin during installation

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, AMI 150 GP SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 110 AQUARIUM & GLASS SILICONE SEALANT is specially formulated to offer a high strength silicone sealant that is suitable for bonding and sealing full glass constructions as aquaria, terraria and showcases. DOLPHIN 110 AQUARIUM & GLASS SILICONE SEALANT is safe for the aquatic life. It offers advanced adhesion and higher tensile strength requirements to glass and many other non-porous surfaces.

- Aquarium manufacturing- Terrarium manufacturing- Glass viewing panel- Aquarium parts- Aquarium decorations- Terrarium decorations- Aquarium reconstructions

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 110 AQUARIUM & GLASS SILICONE SEALANT has a shelf life of 18 months from manufacturing date. Containers should always be kept sealed when not in use.

- Sealing construction joints in concrete structures.- Sealing masonry joints, balcony, window and door perimeter joints.- Faade and metal cladding joints.- Aluminum angle joints.- Pinhole repairs and shower screen.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 125 UNIVERSAL SILICONE SEALANT has a shelf life of 15 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 125 WINDOWS & DOORS SILICONE SEALANT is a high performance one part sealant that reacts with moisture at ambient temperature to form an attractive, color stable highly flexible rubber seal with excellent movement capabilities. DOLPHIN 125 WINDOWS & DOORS SILICONE SEALANT has good adhesion to non-porous surfaces such as glass, metals and plastic as well as porous surfaces like vinyl, concrete and mortar.

- Window and door sealing- Vinyl siding sealing- General Sealing and waterproofing- General construction- Vinyl, aluminum, and metal siding- Metal building and portable housing applications.- Glass glazing- Sealing and bonding on porous substrate

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 125 WINDOWS AND DOORS SILICONE SEALANT has a shelf life of 15 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 140 GENERAL PURPOSE SILICONE SEALANT is a fast curing one-part anti-fungi silicone sealant which cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surface, metals, most plastics, tiles, wood concrete and other building materials. DOLPHIN 140 GENERAL PURPOSE SILICONE SEALANT has excellent physical properties designed to give outstanding durability and performance.

- Glazing applications- Weather sealing of sheet cladding and curtain walling- General sealing and assembling- Draught proofing- Sealing doors, windows frames, skylights, port lights, backlights etc.- Sealing air conditioning system- Kitchen and bath counter-tops, sanitary seals

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 140 GP SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 140 SANITARY SILICONE SEALANT is a one-component silicone sealant with anti-fungal and anti-bacterial properties which forms a durable silicone rubber seal upon cure with moisture. DOLPHIN 140 SANITARY SILICONE SEALANT has excellent properties for resistance to mildew and mold formation making it most suitable for sanitary fixtures in areas such as locker rooms, kitchens, swimming pool facilities and lavatories.

- Used to seal around bathtubs, showers, stall, wall fixtures, sinks, and other bathroom fixtures including countertops, soap fixtures, air dyers and drains.- Used for grouting and bedding some ceramic tiles.- Used for interior and exterior applications where areas are prone to mold and mildew formation.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 140 SANITARY SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 120 HIGH TEMPERATURE SILICONE SEALANT is a one-part moisture-curing RTV (Room Temperature Vulcanizing) silicone that cures to form a tough rubber. DOLPHIN 120 HIGH TEMPERATURE SILICONE SEALANT was specifically formulated to be used where operating temperatures up to 300C (572F) are reached intermittently. It contains red iron oxide which enables it to be a true high temperature silicone sealant that will continue to be resilient at extreme temperatures.

- Use in industrial ovens- HVAC- High temperature general sealing and waterproofing- Automotive applications- Water and oil pumps seals- Wire and cable insulation- Furnace and humidifier- Gasket- Engine components- Telecommunications including coaxial cable connectors.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 120 HIGH TEMPERATURE SILICONE SEALANT has a shelf life of 18 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN ACRYSEAL ACRYLIC SEALANT is one-component high quality, plastic-elastic sealant based on acrylic emulsion. The product is almost odor free and is not corrosive towards metals. After application, the product forms a tough rubber by evaporation of water from the sealant. DOLPHIN ACRYSEAL ACRYLIC SEALANT prevents air and moisture from passing through cracks and joints.

- Suitable for interior and exterior applications like perimetral joints in building and other type of construction.- Suitable for general applications.- Joints in the building industry between wood, metal window frames concrete and brick work.- Joints between stairs and wall, between concrete and ceiling elements, between wall and ceiling skirting boards windows sills and aerated concrete for inside and outside application.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with clean cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
DOLPHIN ACRYSEAL ACRYLIC SEALANT should only be used where slight joint movement is anticipated. For extremely deep joints, use foam joint filler. Tool sealant after application and before tack-free skin formation. Tooling of sealant should be done in one continuous stroke. Use masking tape adjacent to joint to obtain a cleaner joint. Remove masking tape immediately after tooling.

CLEANUP AND REMOVALExcess caulk should be cleaned off tools and non-porous surfaces while it is in the uncured state using a wet cloth. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN ACRYSEAL ACRYLIC SEALANT has a shelf life of 24 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN DUCT ACRYLIC SEALANT is a high performance sealant designed for used in heating and air conditioning system. DOLPHIN DUCT ACRYLIC SEALANT provides excellent strength, flexibility and resistance to heat and cold, forming a seal against air leakage. DOLPHIN DUCT ACRYLIC SEALANT cures to tough sealant and remains flexible at low and high temperature.

DOLPHIN SILICONIZED ACRYLIC SEALANT is suitable for both interior and exterior applications that provide a permanently flexible long lasting seal.

DOLPHIN SILICONIZED ACRYLIC SEALANT has improved adhesion characteristics when compared to conventional acrylic sealant. It also contains a fungicide to prevent mould growth and can be over painted.

- Sealing around windows and door frames.- Sealing around baseboard.- Cornice around trim.- Sealing anywhere a weather tight seal is desired.- Sealing corner joints- Sealing where siding meet trim.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with clean cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
DOLPHIN SILICONIZED ACRYLIC SEALANT should only be used where slight joint movement is anticipated. For extremely deep joints, use foam joint filler. Tool sealant after application and before tack-free skin formation. Tooling of sealant should be done in one continuous stroke. Use masking tape adjacent to joint to obtain a cleaner joint. Remove masking tape immediately after tooling.

CLEANUP AND REMOVAL
Excess caulk should be cleaned off tools and non-porous surfaces while it is in the uncured state using a wet cloth. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN SILICONIZED ACRYLIC SEALANT has a shelf life of 24 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN EXTERNAL FRAME ACRYLIC SEALANT is a high quality acrylic sealant that provides a long lasting, permanently flexible seal in a wide variety of applications.

DOLPHIN EXTERNAL FRAME ACRYLIC SEALANT contains antifungal agent making it highly resistant to mould growth.

- Sealing around timber and metal frames.- Sealing around windows and door frames.- Sealing around baths, basin, kitchen work tops.- Cornice applications- Sealing anywhere a weather tight seal is desired.- Sealing cracks and gaps in brickwork, stone and concrete.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with clean cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
DOLPHIN EXTERNAL FRAME ACRYLIC SEALANT should only be used where slight joint movement is anticipated. For extremely deep joints, use foam joint filler. Tool sealant after application and before tack-free skin formation. Tooling of sealant should be done in one continuous stroke. Use masking tape adjacent to joint to obtain a cleaner joint. Remove masking tape immediately after tooling.

CLEANUP AND REMOVAL
Excess caulk should be cleaned off tools and non-porous surfaces while it is in the uncured state using a wet cloth. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN EXTERNAL FRAME ACRYLIC SEALANT has a shelf life of 24 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIRE STOP ACRYLIC SEALANT is a one part, fire rated acrylic sealant designed for internal perimeter pointing of fire rated door and window frames. It has good adhesion to a wide variety of substrates without the use of primer.

- Fire blocking applications in the annular space around wires, pipes, ducts, vents, cable lines and other penetrations to the building envelope.- Sealing joints, voids and irregular holes in fire walls, partitions and other structures also for maintaining the integrity of pipes and cables that penetrate them.- For internal perimeter pointing of fire-rated door and window frames.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with clean cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
DOLPHIN FIRE STOP ACRYLIC SEALANT should only be used where slight joint movement is anticipated. For extremely deep joints, use backing material to fill. Tool sealant after application and before tack-free skin formation. Tooling of sealant should be done in one continuous stroke. Use masking tape adjacent to joint to obtain a cleaner joint. Remove masking tape immediately after tooling.

CLEANUP AND REMOVAL
Excess caulk should be cleaned off tools and non-porous surfaces while it is in the uncured state using a wet cloth. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIRE STOP ACRYLIC SEALANT has a shelf life of 24 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 500 NEUTRASEAL SILICONE SEALANT is a high performance one-part moisture curing RTV (room temperature vulcanizing) silicone sealant that cures upon exposure to atmospheric moisture to form a tough, high modulus rubber. It has a long term flexibility and durability with excellent adhesion properties most ideal for use in confined work areas since no objectionable odors are evolved.

- OEM applications (depending on substrates)- RV construction- Confined work areas that require less odor- General sealing and waterproofing- General construction- Vinyl, aluminum and metal siding- Metal building and portable housing applications- Glazing- Good adhesion to glass, wood, ceramic, stainless steel and many plastics

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 500 NEUTRASEAL SILICONE SEALANT has a shelf life of 18 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 500 MIRROR SILICONE SEALANT is a clear neutral curing, high modulus 100% silicone sealant without standing adhesion that provides a permanent flexible bond for mirrors to painted surfaces, plasters, metal and wood.

- Confined work areas that require less odor- Excellent primer-less adhesion to numerous porous and non-porous substrates- Mirror wall applications- Bonding mirrors to concrete, wood, doors or ceramic wall tiles- Good adhesion to glass, stainless steel and many plastics- Vinyl, aluminum and metal siding- Perimeter sealing to wood, metal, PVC and coated frames

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 500 MIRROR SILICONE SEALANT has a shelf life of 18 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN ALL WEATHER WS 520 SILICONE SEALANT is a premium performance weather sealing product specially designed for general and weather sealing in curtain wall and building faades. DOLPHIN ALL WEATHER WS 520 SILICONE SEALANT has superior weather resistance, virtually unaffected by sunlight, rain, snow, ozone. It has excellent rheology with low string upon gunning.

- Ideal for expansion, connection, perimeter and other movement joints.- Suitable for use on coated glass, galvanized steel , masonry and other porous and nonporous substrate- Extension compression movement capability up +50 % of the original joint width.- Joints in precast concrete elements.- External walling and cladding joints.- Curtain walling and sealing around window and door frames.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface. Porous surfaces may need to be grinded, free of dust and cleaned.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN ALL WEATHER WS 520 SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN ALL WEATHER WS 525 SILICONE SEALANT is a high performance weather sealing silicone sealant specially formulated for general and weather sealing in curtain wall and building faades. DOLPHIN ALL WEATHER WS 525 SILICONE SEALANT has excellent weather resistance, virtually unaffected by sunlight, rain, snow and ozone. It has excellent rheology with low string upon gunning.

- Joints in precast concrete elements.- External walling and cladding joints.- Ideal for expansion, connection, perimeter and other movement joints.- Suitable for use on coated glass, galvanized steel , masonry and other porous and nonporous substrate.- Extension compression movement capability up +50 % of the original joint width.- Curtain walling and sealing around window and door frames.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface. Porous surfaces may need to be grinded, free of dust and cleaned.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN ALL WEATHER WS 525 SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN ALL WEATHER WS 530 SILICONE SEALANT is a one component neutral curing, low modulus construction silicone sealant. It is particularly suitable for interior and exterior applications, such as external weather seals, expansion joints and perimetral joints in buildings and other type of constructions

- Suitable for curtain walling.- Durable adhesion to range of porous and non-porous surfaces.- Excellent adhesion to wide range of applications.- Sealing dynamically moving joints such as expansion and control joints, concrete panel joints, tilt-up joints, curtain wall joints.- Perimeter caulking (windows, doors panels and frames etc.)

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface. Porous surfaces may need to be grinded, free of dust and cleaned.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN ALL WEATHER WS 530 SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIRE STOP SILICONE SEALANT is a single component, neutral cure, gun-grade silicone fire stopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a fire rated joint. DOLPHIN FIRE RATED SILICONE SEALANT is tested for up to 4 hour fire-rating at independent laboratories and is approved for both through penetrations and joint applications.

- Classified for sealing fire rated service penetrations and construction joints in horizontal and vertical fire- Penetrations: steel, copper and EMT pipe- Fiberglass pipe insulation- Construction joints- Cable penetrations- Building Assemblies: concrete and CMU- Gypsum wall board

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIRE STOP SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIX & SEAL MS GP SEALANT is a flexible, high strength sealant and adhesive that is suitable for wide range of applications unlike silicone sealants. DOLPHIN FIX & SEAL MS GP SEALANT can be painted over with most acrylic and alkyd paints and is hazard free. The product can be used indoors or outdoors for sealing and/or bonding any materials.

- Wall panels- Glass (not recommended for PE, PP and Teflon (PTFE))- Stone and concrete- Many metals- Skirting boards- Window sills- Thresholds- Insulation

SURFACE PREPARATION
Ensure that the surface to be sealed is clean, dry, sound and grease free. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. When used on remedial work, all existing sealant must be removed. Porous substrates such as concrete, brickwork, mortar etc. must be mechanically cleaned of loose particles using a steel brush, sanding disc or any similar means.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIX & SEAL MS GP SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIX & SEAL HIGH TACK is an elastic adhesive formulated based on hybrid technology. It has extreme initial tack with high strength that is suitable for wide range of applications both for indoor and outdoor uses.

- Construction and building applications where high bonding strength and fast cross linking is required.- Works for general indoor and outdoor sealing and bonding applications.- Wide variety of substrates including wood, metals, PVC, plastics, stone and concrete.- Elastic bonding for industrial use as well as car and container industry.

SURFACE PREPARATION
Ensure that the surface to be sealed is clean, dry, sound and grease free. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. When used on remedial work, all existing sealant must be removed. Porous substrates such as concrete, brickwork, mortar etc. must be mechanically cleaned of loose particles using a steel brush, sanding disc or any similar means.

TOOLING AND FINISHING
Extrude adhesive with a gun and tool with a round spatula to spread the adhesive.

CLEANUP AND REMOVAL
Uncured adhesive may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the adhesive to cure before removal by peeling or other mechanical means. Cured adhesive can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIX & SEAL HIGH TACK has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIX & SEAL CRYSTAL CLEAR is a flexible, high strength sealant and adhesive that is suitable for wide range of applications both for indoor and outdoor uses. DOLPHIN FIX & SEAL CRYSTAL CLEAR is most ideal for sealing and bonding transparent materials where an almost invisible finish is required.

- Connecting transparent joints in construction and building applications.- Common indoor and outdoor sealing and bonding applications.- Indoor application for invisible bonding of glass and other transparent materials.- Wide variety of substrates including wood, metals, PVC, plastics, stone and concrete- Insulation applications.

SURFACE PREPARATION
Ensure that the surface to be sealed is clean, dry, sound and grease free. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. When used on remedial work, all existing sealant must be removed. Porous substrates such as concrete, brickwork, mortar etc. must be mechanically cleaned of loose particles using a steel brush, sanding disc or any similar means.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIX & SEAL CRYSTAL CLEAR has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 600 GENERAL PURPOSE SILICONE SEALANT is a ready-to-use, one-component low modulus and neutral-cure alkoxy silicone sealant. It has a good adhesion with wide range of both porous and non-porous surfaces without the need of priming and professional quality

- Suitable for interior and exterior applications like perimetral joints in building and other type of construction.- Durable adhesion in range including concrete, masonry, brick, PVC-U, wood glass and glazed surfaces and some metals used in construction.- Suitable for general applications.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 600 GENERAL PURPOSE SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN WS 620 WEATHER SEALANT is a one-part, neutral curing, high performance silicone sealant used in general construction. It is suitable for interior and exterior applications such as general glazing, weather sealing in curtain wall and building faades, and expansion joints. DOLPHIN WS 620 WEATHER SEALANT has superior weather resistance, virtually unaffected by sunlight, rain, snow, ozone.

- Suitable for external weather sealing.- Used in some metals for construction without danger of corrosion from the sealant.- Ideal for expansion, connection, perimeter and other movement joints.- External walling and cladding joints.- Curtain walling and sealing around window and door frames.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface. Porous surfaces may need to be grinded, free of dust and cleaned.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN WS 620 WEATHER SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 630 STRUCTURAL GLAZING SEALANT is a singlecomponent, neutral-cure, high modulus silicone sealant ideal for a wide variety of glazing applications. DOLPHIN 630 STRUCTURAL GLAZING SEALANT offers fast through-cure and exceptional tensile strength. It is designed to meet the stringent performance needs for both 2- and 4-sided structural and protective glazing. It is utilized in unitized curtain wall manufactured in plant or a fieldglazed project. All structural glazing applications must be reviewed and approved by AMI Technical Services.

- Produces a tough, flexible rubber cure for a tenacious, watertight seal.- No mixing required for immediate application.- Meets the currently accepted engineering standards for structural glazing.- Maintains elastomeric structural joints sealant properties permanently, even under harsh conditions.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface. Porous surfaces may need to be grinded, free of dust and cleaned.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 630 STRUCTURAL GLAZING SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN FIX & SEAL MS GP SEALANT is a flexible, high strength sealant and adhesive that is suitable for wide range of applications unlike silicone sealants. DOLPHIN FIX & SEAL MS GP SEALANT can be painted over with most acrylic and alkyd paints and is hazard free. The product can be used indoors or outdoors for sealing and/or bonding any materials.

- Wall panels- Glass (not recommended for PE, PP and Teflon (PTFE))- Stone and concrete- Many metals- Skirting boards- Window sills- Thresholds- Insulation

SURFACE PREPARATION
Ensure that the surface to be sealed is clean, dry, sound and grease free. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. When used on remedial work, all existing sealant must be removed. Porous substrates such as concrete, brickwork, mortar etc. must be mechanically cleaned of loose particles using a steel brush, sanding disc or any similar means.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN FIX & SEAL MS GP SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN WINDSCREEN FIX is specially designed for automotive glass replacement industry with a high degree of strength utilizing a hybrid polymer technology.

- Car front windscreen bonding and other automotive glass fixing and sealing application.- Bonding and sealing of sunroof systems, floor construction elements, as well as windows & doors.- Works for construction and building applications.- Elastic bonding for industrial use as well as car and container industry.

SURFACE PREPARATION
Ensure that the surface to be sealed is clean, dry, sound and grease free. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. When used on remedial work, all existing sealant must be removed. Porous substrates such as concrete, brickwork, mortar etc. must be mechanically cleaned of loose particles using a steel brush, sanding disc or any similar means.
Remove old glass in accordance to manufacturers instruction. All existing/old sealants and wipers must be removed according to manufacturers instructions before application.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN WINDSCREEN FIX has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.