Silicone Sealants #762792

DOLPHIN 105 ALUMINUM & GLASS SILICONE SEALANT is a fastcuring one-part silicone sealant with excellent antifungal properties providing superior adhesion and premium performance. It cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surfaces and metals, most plastic, tiles, wood, concrete and other building materials.

- Aluminum siding and metal siding- General industrial application- Metal building and portable housing applications- Glass glazing- Sheet metal work- HVAC- General sealing and waterproofing- General construction

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 105 ALUMINUM & GLASS SILICONE SEALANT has a shelf life of 18 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 1200G SILICONE SEALANT is a fast curing one-part anti-fungi silicone sealant which cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surface, metals, most plastics, tiles, wood, concrete and other building materials. DOLPHIN 1200G SILICONE SEALANT has excellent physical properties designed to give outstanding durability and performance.

- Glazing applications- Weather sealing of sheet cladding and curtain walling- General sealing and assembling- Draught proofing- Sealing doors, windows frames, skylights, port lights, backlights etc.- Sealing air conditioning system- Kitchen and bath counter-tops, sanitary seals

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 1200G SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 140 GENERAL PURPOSE SILICONE SEALANT is a fast curing one-part anti-fungi silicone sealant which cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surface, metals, most plastics, tiles, wood concrete and other building materials. DOLPHIN 140 GENERAL PURPOSE SILICONE SEALANT has excellent physical properties designed to give outstanding durability and performance.

- Glazing applications- Weather sealing of sheet cladding and curtain walling- General sealing and assembling- Draught proofing- Sealing doors, windows frames, skylights, port lights, backlights etc.- Sealing air conditioning system- Kitchen and bath counter-tops, sanitary seals

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 140 GP SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use.

DOLPHIN 510 GENERAL PURPOSE NEUTRAL SILICONE SEALANT is a high performance, UV-resistant, one-component, neutral cure silicone sealant. DOLPHIN 510 GENERAL PURPOSE NEUTRAL SILICONE SEALANT is an industrial grade, neutral silicone sealant designed for sealing lap joints in metal guttering, aluminum roofing flashing and down pipes

- Metal roofing system- Flash down pipes- Skylights & extraction units- Pipe or sprinkler system penetrations- Air conditioning- Sheet metal- General purpose adhering & sealing for building materials, steel, aluminum, concrete, brick and masonry block or brick work.

SURFACE PREPARATION
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

TOOLING AND FINISHING
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.

CLEANUP AND REMOVAL
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77F (25C) in dry warehouse conditions, DOLPHIN 510 GENERAL PURPOSE NEUTRAL SILICONE SEALANT has a shelf life of 12 months from manufacturing date. Containers should always be kept sealed when not in use

DOLPHIN FIX & SEAL NAIL FREE ADHESIVE is a general purpose adhesive for general construction work both for interior applications. DOLPHIN FIX & SEAL NAIL FREE ADHESIVE is a gunnable, synthetic rubber based adhesive with excellent green strength, flexibility, excellent resistance to temperature.

- Contact adhesive for installation of wall and floor panels.- Adhesion of metal, timber & other sheets of plan materials to concrete, plaster or other rigid surfaces.- Bonding applications where high strength is required.- Timber, metal, contentious and plaster sheets to timber or metal studs.- Installation to brick, masonry or concrete walls.- General purpose construction adhesive.

APPLICAION
DOLPHIN FIX & SEAL NAIL FREE ADHESIVE can be applied either as one-way method or a two-way method adhesive. For both applications, the initial requirement is that surfaces to be bonded must be clean and dry and free of grease, oil or dust. Before application, loose materials or flaking paint must be removed and sanded lightly. Surface temperatures of substrates should not exceed 30C and the product should not be used where continuous exposure to elevated temperature occurs. Apply a 4-6mm bead of adhesive to substrate with a cartridge or extrusion gun with a notched towel. Beads should not exceed 45cm apart and butt joints should be adhered on both panel edges. Surfaces should be bonded together immediately.
One-Way Method- This method for heavy panels or those that are formed to place a loading or stressed memory on the bond line.- After application and bonding substrates together, they should be sufficiently clamped, nailed or screwed for maximum surface contact.- Mechanical fasteners should be retained if highly stressed; but temporary fastening can be released after a minimum of 24 hours.- For flooring applications, manufacturers specifications should be followed.- To stop floor squeaking, apply a bead of adhesive into the groove of each board after it is laid and immediately prior to mating the tongue from the next panel or board.

Two-Way Method- After application, press firmly over entire surface to transfer adhesive and then pull both surfaces apart.- Allow to tack off for 3-5 minutes (depending on ambient weather conditions) and then reposition and press together firmly.- Bonded areas should be tapped with a hammer via a padded block to ensure firm contact.- Depending on the weather conditions and substrates, 12-72 hours is required to reach maximum bond strength.- Some weighted panels may require temporary mechanical fastening that should be retained for at least this period.

PRECAUTIONS
Always test for product compatibility prior to use of this product. ? Veneer plywood can be affected by solvent soaking through the ply and might cause bubbling of the veneer.

CLEANING
Any wet or partially wet adhesive can be removed with scraping and acetone solvent. Dried adhesive is best removed mechanically or with a scraper or by sanding.

Stored in original unopened container below 25C, in cool, dry condition, away from direct sunlight and in a well-ventilated area. Keep containers securely sealed.
Storage outside these parameters may dramatically reduce its shelf life.