Sharjah, United Arab Emirates
Our Products
| Butterfly valve These valves are used as an economical isolation valve instead of ball and gate valves.
|
| Globe Valve "These valves are Used where throttling or both throttling and shut-off are required.
|
| Swing / Wafer Check Valve These valves are used to prevent flow reversal in piping systems.
|
| Butterfly Valves with Special Features and Options Pump throttling and quick quarter turn shut off control can be easily achieved in limited space areas. Lever operated valve stem, gear operated valve stem, square operating nut, chain operated valves, lug nut mounts. |
| 2 Way Solenoid valve 2-way piloted diaphragm solenoid valves Normal closed are capable of operating at zero differential pressure. They are capable of handling an operating pressure range from 0 PSI to 200 PSI. These valves are offered in a wide variety of diaphragm and body materials to provide on-off control of various fluids. Sizes 1/2" to 2", with coil voltage rating 21V DC to 220V AC, For gases use also availble in Aluminium Body. |
Aluminium 5/3 Way Double Acting Pneumatic Solenoid Valve has 5 ports with 3 positions and with twin coils offering one of the pneumatic industries most popular Aluminium 5/3 way solenoid valve. These are also ideal for compressed air control for pneumatic cylinder and air actuator control offering a stay put function as the fail safe position is stop even in mid stroke or actuator mid turn position . This compact design has the advantages of using Low Power 5 watt Coils with reduced power consumption,
| Commissioning / Balancing Valve The commissioning valve has hidden regulating and locking functions with high accuracy and good repeatability. The valve is fitted with two standard pressure test points, extended test points are available when required. A Micro-set two number position indicator is fitted to the adjustment handle for recording the valve position. |
Aluminium 5/2 Way Spring return Pneumatic Solenoid Valves have 5 ports with 2 positions with the spring return system. This is one of the Pneumatic Industries most popular Aluminium 5/2 way solenoid valves and they can be mounted to aluminium manifold blocks for ease of installation and maintenance. These are ideal for compressed air control for pneumatic cylinder and air actuator control offering fail safe open or closed positioning depending on pipework set up. This compact design has the advantages of using Low Power 5 watt Coils reducing power consumption.
| Angle Valves The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also). The superior design of the piston is unique to the market, enabling the plug to retract farther from the flow path, ensuring the highest flow capacity. The dual packing design, and a large diameter self aligning stem insures the highest cycle life. Angle Seat Valves are ideal for use in Commercial and Industrial Process Applications including Steam applications, Air drying equipment, Sterilizers, Autoclaves, Process control applications, Laundry equipment, Textile dyeing & drying, Bottling & dispensing equipment, Ink & paint dispensing, and Industrial compressors. |
| Diffrential Pressure Control Valve "The differential pressure controller is a straight-version proportional controller and works without auxiliary energy. The required nominal differential pressure can be continuously adjusted from 50 to 300 mbar. The adjusted set point can be read, locked and sealed. The nominal set point is factory preset at minimum. The required set point is adjusted by means of a hand wheel and secured against turning by the block ring. The impulse line (1000 mm) is included with the valve and is connected to a circuit regulating valve in the flow." |
| Root Valves / Bleed Valve The Single & Double Block CM40 forged barstock construction features a straight through (roddable) bore design. The roddable design allows the valve to be rodded out while in line and under pressure, should the valve become plugged. It also features a replaceable soft or metal seat, which can be easily removed and replaced, eliminating the need for valve removal should the seat become damaged by process conditions. It is ideally suited for severe process conditions (i.e. high temperatures, high pressure, and steam) or applications where valve plugging is a concern. |
| Needle Valves "Wide variety of Needle Valves to meet the varying requirements of the Petrochemical, Power and Gas Industries.Bore Sizes: 1/8"" (3.2mm), 3/16"" (4.8mm), 5/16"" (8mm) 3/8"" (9.5mm), 7/16"" (11mm), 5/8"" (16mm)Straight Through (roddable) and globe pattern modelsNeedle (rising plug) and ball stem end modelsStandard pressures to 6000 psig (414 barg), and to 10, 000 psig (689 barg) availableVarious standard end-connections from 1/4" to 1" - threaded, socketweld, buttweld" |
| Wafer Double Disc Check Valve "DD Wafer Double Disc Check Valves are constructed from rugged castings that are machined to exacting specifications. Reference individual technical data pages for standard disc, shaft, spring, and elastomer seat.Pipeline Sizes from 2" to 48" 125 lb. to 1500 lb.Designs Cast Iron, Carbon Steel and 316SS Vertical or horizontal installation" |
| Wafer Silent Check Valves CW Wafer Silent Check Valves are constructed from individual technical data pages for standard disc, seat, springs, and bushing rugged castings that are machined to exacting specifications. |
| Pressure Reducing valve "A pressure reducing valve (PRV) is a mechanical device designed to lower the working pressure of a liquid or gas from the supply side to the point of use side in a system. Although pressure reducing valves are used in numerous applications; this article will focus on PRV's as pertaining to a potable water plumbing system, but they may also be found in hydraulics, natural gas, air and steam to name a few
|
| Swing Check Valve Designed for high pressure and temperature applications where elimination of metal components is desired. PVC, PPL and CPVC construction with FPM or EPDM seals, flanged connections. These swing check vavles can be installed horizontally or vertically and no flange gaskets are required. Options include counter weight for closing assistance (vertical installations), limit switch for position indication and spring assist closure. |
| Y Check Valves Prevent reversal of flow in piping systems to protect pumps, filters and other process equipment with true union ball check valves manufactured from PVC and CPVC with FPM seals. Y check valves enable servicing without removing the valve from the pipeline and they work in any orientation as long as there is a minimum 2 PSI back pressure. |
| Manifold Valves "Manifold Valves, available with hard or soft seat, are made of both carbon steel and 316 stainless steel with inline pipe threads or flanged configurations. All are helium leak tested. Mounting hardware is available. Manifold Valves connect system impulse line and transmitter.Valves can be expanded to 16 stations.Cartridge Valves have stainless steel body.Valves are available with single-/multi-station manifolds. " |
| Large-Size Butterfly Valves Designed for 14 to 24 inch pipelines, these rugged one piece polypropylene valves have a full face liner, eliminating the need for expensive flange gaskets. The 316SS valve stem is completely isolated from the pipeline and the unique sphered disc provides a bubble tight seal with minimum torque. These fabricated valves are easily customized for special pipeline connections. FPM, EPDM and Nitrile liner and seals, high torque gear box, dual lifting lug handles, slotted bottom bolt holes. Compatible with pneumatic or electric actuators. |
| Spring Loaded Y Check Valves These Y check valves are spring loaded to creat a seal even in the absence of back pressure. These are often used to reduce water hammer when pumps are started in an empty, open line. These are hand adjustible for opening at pressures from 2 to 15 PSI. PVC construction with FPM or EPDM seals, these Y check valves work in any orientation. True union connections are available. |
| Butterfly Valves One piece body butterfly valves for pipelines as large as 12" having a full 150 PSI pressure rating. The single piece design fully supports the flanged bolt holes and includes a integral mounting pad for level handle, gear box or actuator mounting (pneumatic or electric). Blow-out proof stainless steel stem with a unique full body liner having a V-notch retention design to assure positive sealing. Integrally molded face seal eliminates need for mating flange gaskets. These butterfly valves are designed for retrofitting to metal pipelines. Viton, EPDM and Nitrile liners with wafer body design. |
| Globe Silent Check Valves "CG Globe Silent Check Valves are constructed from rugged castings that are machined to exacting specifications. Their bodies have drilled flanges that are in accordance with ASME. Reference individual technical data pages for standard disc, seat, guide pins, and bushings. " individual technical data pages for standard disc, seat, guide pins, and bushings. |
